Superhawk138

Jerry is one fast guy behind a revolver that thing cycles faster than a F/A. http://youtube.com/watch?v=uisHfKj2JiI

3 Screws. 1 on the bottom and 2 on the top 1 is visible and the other is under the recoil spring where it locks into the trunnion.

1 original spring works good and you have to remove a little material in the front to kinda round out the inside of the mag so the follower rails line up and the follower doesn't bind when it gets to that point.

That stand alone with stock attachment would make a fun SBS. xm_26.bmp

I'm sorry anybody has to go through that. Burns are terrible. I stand beside you.

The differance is the rear follower rail the 3" is further back the shells rim load behind the folower rail and the 2.5" it loads in front of the follower rail which itself is about 3/16" further towards the front. good idea for a higher cap 2.5" mag but looks like you will sacrifice 2. Sorry.

i usaually shoot at either of these 2 ranges depending on weather, 1 has a outdoor rifle range out to 150 yards and sporting clays but cost $10.00 /hr but usaually lets me have a free hour, The other one indoor only for $10.00 as long as you want open to close or get a 10 visit card for $80.00. http://autreysarmory.com/ http://www.thelockstockandbarrel.com/

Any chance of parting with 1 10round mag? Mmm.. best not, you never know what's coming. The rumors around here are that rusmilitary will have more in January, and that's where I got mine, $60 each as I recall. And when MD Arms releases their 15 (?) rd mag and/or drum mag, I'm buying at least two of each. Before I learned of MD Arms I was planning to make molds for casting the magazine head and follower in a filled epoxy. I hadn't worked out the details for the body, but have had some experience in forming springs so I figured it was a matter of time before I had a working model. A lot

Any chance of parting with 1 10round mag?

Looks like they still have them. http://ioinc.us/mm5/merchant.mvc?Screen=PR...Code=Parts+Kits

I took the measurments from the existing PG nut hole on my X39 and scribed them on my .410 then drilled my 4 corners then used my cutting disk on the dremel.

We have a Walmart near me, but they were thinking of putting in another one about 10 miles away, more in the city, unlike the current one which is on a 5 mile stretch of stores/banks/whatnot. People are afraid if the put up the new one, it will drive all the little mom & pop shops in the city out of business, which it probably will. IMO, you don't need two Walmarts within 10 miles of eachother . I hear you on 10 miles apart, Right now there is one on I85 exit 47 and they are doing site development on exit 51 for another one 4 miles apart WTF.

Thicker receiver?.

Welcome Back

Go Team Saiga kick some ass and welcome to Georgia.

I've met him once a few years ago at Matt Hoffman's Skatepark in Ok doing a signing for Hoffman's Evel Knievel signature bike. RIP American legend.

Over at akforum they are still being inmature about it. but kind of sidetracked as well. with other pics and not just yours. I'm sorry Dayan that you are a victim of something like this. As far as collection goes dude you have a Saiga. Doesn't matter if converted or not awesome guns eitherway.

Gotta love the F-BOMB

Good luck Team Saiga and welcome to Georgia show those tube feeders what you can do.

I hate when i go there and buy .410 slugs sometimes they have 3" and i get them but they always have 2.5" slugs but i didn't have the 2.5" mag yet. They cannot understand when i tell them my mag only holds 3" shells then I find myself trying to explain to them what a Saiga 410 is.

I believe that was Dayan himself who posted about the a-hole at the bank. http://forum.saiga-12.com/index.php?showtopic=19950&hl=

I just use a cheap soldering iron just kind of meld the pieces together. I did the same to my tapco galil handguards. Dinzag was a big help for me with a diagram of the measurements to cut the mags as well as some of the stuff from here helped also. http://forum.saiga-12.com/index.php?showtopic=8240&hl=

Thats one of the problems with the internet, If you post a picture or something and one person sees an opportunity to poke fun good or bad it is just going to explode into something it was never intended to be. Just look at the number of hits this is getting most all guest from other forums that have really been VERY negative towards him.

That front sight is sweet, Can you make them for the .410? Threads should be right to loosen and left to tighten.

I agree with that, The hard work is done for someone that doesn't have the time or other reasons to do the conversion themselves. Just change the furniture if they want too. They had intentions with it probally.