Big John! 2,062 Posted October 17, 2013 Report Share Posted October 17, 2013 Trail blazers of motorized off roading! 1 Quote Link to post Share on other sites
Ronin38 2,117 Posted October 17, 2013 Report Share Posted October 17, 2013 I saw that a while back. It's amazing to me how that thing got through some of the mud and slop that it did! I seriously doubt my 2007 4x4 truck could have gotten through some of that! I wonder if I can get a similar set of wheels like that on my truck? "Wagon wheels" for sure! Quote Link to post Share on other sites
MT Predator 2,294 Posted October 17, 2013 Report Share Posted October 17, 2013 Nice one! Quote Link to post Share on other sites
MT Predator 2,294 Posted October 17, 2013 Report Share Posted October 17, 2013 Quote Link to post Share on other sites
mancat 2,368 Posted October 17, 2013 Report Share Posted October 17, 2013 Sometimes not having a lot of torque is a good thing in terrain like that. Give the same track to someone driving a 500-something horsepower Porche SUV, and they would probably spin the tires and dig right in. Quote Link to post Share on other sites
MT Predator 2,294 Posted October 17, 2013 Report Share Posted October 17, 2013 Torque and horsepower are two different things. Quote Link to post Share on other sites
mancat 2,368 Posted October 17, 2013 Report Share Posted October 17, 2013 Yep they are, but the 500HP Porche will have a lot of torque as well. Quote Link to post Share on other sites
MT Predator 2,294 Posted October 18, 2013 Report Share Posted October 18, 2013 I doubt that old Dodge had much of neither. I'm surprised those skinny tires even got traction. That Porsche SUV would probably have on board technology to provide power to the wheels that need it to push it through the soft stuff. Quote Link to post Share on other sites
Mullet Man 2,114 Posted October 18, 2013 Report Share Posted October 18, 2013 Skinny tires can cut right thru the slop and get down to the more solid ground where there is traction. I like where dude reaches out and helps push just that little extra bit and voilà, it goes. 1 Quote Link to post Share on other sites
TonyRumore 1,332 Posted October 18, 2013 Report Share Posted October 18, 2013 Torque and horsepower are two different things. Well.....sort of. Torque is simply a calculation based on horse power and rpm. Torque = HP*5252/RPM Since you're dividing your horse power by RPM, you end up with more torque if you can make a bunch of horse power at low RPM. If you have to spin the motor up to high RPM to make HP, your calculated torque number is naturally going to fall off. Tony Quote Link to post Share on other sites
G O B 3,516 Posted October 19, 2013 Report Share Posted October 19, 2013 That Dodge probably had about 37HP, and weighed 1200# or so. The old motors had iron pistons with 4 or 5 rings and a red line of about 2700 RPM. Metallurgy has come a LONG way! Quote Link to post Share on other sites
netpackrat 566 Posted October 19, 2013 Report Share Posted October 19, 2013 Torque and horsepower are two different things. Well.....sort of. Torque is simply a calculation based on horse power and rpm. Torque = HP*5252/RPM Since you're dividing your horse power by RPM, you end up with more torque if you can make a bunch of horse power at low RPM. If you have to spin the motor up to high RPM to make HP, your calculated torque number is naturally going to fall off. Tony Basically, although my understanding is that HP is a derivation of torque at a given RPM, and not the other way around. The dynamometer measures torque, and then you use that to calculate HP. Quote Link to post Share on other sites
Remek 771 Posted October 19, 2013 Report Share Posted October 19, 2013 (edited) Horsepower is a measure of the rate at which work is done, and hence in a reciprocating engine, depends on RPM. Torque is much more simple to understand, it is rotary force, measured in distance fom axis times the force unit, e.g. Foot pounds. Heres a simple explanation: one horsepower is 550 foot-pounds per second. If you want to kill yourself with the math (actually calculus/differential equations) wikipedia has the basics http://en.wikipedia.org/wiki/Horsepower I'm sure our resident barrista will be happy to provide a mich better explanation. Edited October 19, 2013 by Remek Quote Link to post Share on other sites
Ronin38 2,117 Posted October 19, 2013 Report Share Posted October 19, 2013 I've always liked the definition from one of the road racers: Horsepower is how fast you're going when you hit the wall. Torque is how far the wall moves after you hit it. Quote Link to post Share on other sites
gunfun 3,931 Posted October 21, 2013 Report Share Posted October 21, 2013 Horsepower is a measure of the rate at which work is done, and hence in a reciprocating engine, depends on RPM. Torque is much more simple to understand, it is rotary force, measured in distance fom axis times the force unit, e.g. Foot pounds. Heres a simple explanation: one horsepower is 550 foot-pounds per second. If you want to kill yourself with the math (actually calculus/differential equations) wikipedia has the basics http://en.wikipedia.org/wiki/Horsepower I'm sure our resident barrista will be happy to provide a mich better explanation. That is one of the clearest explanations I have come across. Who is the resident barista? As for the video, I think it was taken because it was impressive driving, and to show off, not because being able to keep going in that muck was the norm. A lot of cars got pulled out of the slop by draft horses and tractors. Quote Link to post Share on other sites
Remek 771 Posted October 21, 2013 Report Share Posted October 21, 2013 ^^^ Resident Barrista: I was referring to coffee-boy, or Maxwelhse. Quote Link to post Share on other sites
magsite20 1,664 Posted October 21, 2013 Report Share Posted October 21, 2013 While of course on the vehicle in question the engine set up is a part of if it will go through or over a surface, most of the time that’s really not the biggest factor. 90% of the 4X4s running around don’t really have 4X4 they’re just running 1 rear and 1 front wheel. Quote Link to post Share on other sites
Ruffian72 548 Posted October 21, 2013 Report Share Posted October 21, 2013 As Mullet Man stated, thin tires for mud. Still go that way in oilfield and farm. Get down to hard base. Same reason an old 2 wheel drive farm tractor can get around a sloppy feedlot, while a 4x4 pickup gets stuck. When muck gets too deep, actually have had to blade to get vehicles through. Where clay is involved, this video wasn't in clay. Top surface gets greasy, slick like ice. Actually got to chain as in snow. Wider tires for sand. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.