dinzag

Also I'm usually available by email and respond to most within a day unless you are emailing me about p3nis enhancement pills. Got enough of those around thanks Have a couple grandmothers in the hospital at the moment so I've been in and out, but I'm usually around.

The reason those guides have the low angled ramp is they were designed to feed Galil Orlites. (in addition to other mags) They are 3/16" thick, about twice as thick as standard 223 ak guides which do not feed orlites. Also these are designed to work with most of the cheap mil-surp mags, not the factory mags or surefire mags. Those mags need the raised section removed in the center front to look like the mil-surp mags. A factory mag will not click in.

Weaz, Picture the face of the barrel as a clock - muzzle facing away and looking where the bullet enters. Line the right-hand edge of the guide with the step in the barrel face - 4 o'clock position. Screw goes bottom dead center (6 o'clock position of the barrel face)

Happy B-Day Pete!

I was #99 at 5:00pm in our township. Sadly looks like Paul only got 6%.

That's what I use.

Happy B-Day! Here's a jelly donut you hoser!

Yup, automatic center punches under tools, or your local hardware store.

Sorry to hear that as well, know that our thoughts are with you.

Another must have for those CQB zombie situations.

Yeah, that's all it is. Pretty funny though. That was an April fools joke I played on the guys a couple of years ago...lol. Huh? WTF dude, let me in on the joke next time eh? SHeesh. I've sent like 20 dudes to you for the conversion parts. (heads to site to remove pic...)

Mmmm the punisher! Excellent price on that setup given the mags & all Shouldn't last long...

(in Michigandereze) left & down from where the thumb & index finger meet.

I haven't tried them, but blackjackbuffers now sells a "Saiga" selector. I'm assuming the divot is a little closer to the Saiga location than their other models. (for the receiver swipe) I have noticed even Saiga to Saiga some of those are a little off from each other. If someone tries one out, post your findings.

Mike, a nice sexy curved mag would make you very rich - IMHO. (in case no one told ya )

Your best option is threading. It's pretty much the same cost as well. A couple guys have had problems with them coming loose. The set-screw ones require you to do a couple things for proper installation, outlined in their instructions. My test rifle has hundreds and hundreds of rounds through it and it's never came loose. I tried to take it off but the heads of the screws want to strip out. Loctite needs to be heated up. If you don't feel comfortable with installing it yourself or threading the barrel, have a professional do it. I had a guy have one a few thousands too small f

I tried a go at it with the pipe cutter, crumbled 2 bits. Don't bother. It is good for scribing a cut line though. Them barrels are pretty tough and thick. Personally I prefer the abrasive chop saw or hack saw method. If you get it straight, file it clean & deburr. If you think it's not square you can use the crown tool to be certain it is flat, but on a shotgun, I don't think that is overly crucial. Not like a high pressure rifle. Threading kit rental includes die, holder & tat. All you will need is cutting fluid and elbow grease.

Lookin good Chris, I would suggest opening a smaller hole closer to your ideal location, then open that as necessary.

Yes, I do have some kits, with TAT's for both full choke and cut off/no choke. Also have a 90 degree crown tool to square up the muzzle prior to threading. Thanks Doc & GH

Making them straight will only yield 7 rounds maybe, then the feed angle is sh!t and they will not feed. Cobra, that straight one will only hold 7. I think that's what they advertize them at.

There's about 1/4" difference in length.

Done deal, bring the SMG, mags & ammo - lots of ammo. Oh yeah, ear plugs for the safety part

I prefer the e-clips myself, I have a set of mini pliers & they pop right on. A mini-screw driver will pop them off. Everyone prefers something different. I'm always tearing mine apart and reassembling and I've found those to be the quickest for me. I've never had them come off during use either. If they get bent or damaged on install they could come off.

Hey guys, sorry I missed this thread. My PC motherboard fried so I had to borrow a friends short term and only had email. Res, I sent you a voucher sice you fixed it & all the others (22_shooter & others) a replacement guide and a discount voucher. Sorry about the fitment issues. I know some of you had planned to get to your installs right away. I failed to inspect them being in a rush. All set now and thank you all for your patience. Especially over the holidays. Brian

AK-74, AK-47 is too long