sunnybean 939 Posted May 15, 2011 Report Share Posted May 15, 2011 I finally got out to test the booster puck and the V plug. I had been running a KA puck and Gunfixer plug and lighter return spring. I messed around with a bunch of different combos today. I didn't have much luck with the booster puck. Its a tight fit in my gun (tighter than the factory, KA, or twister). In the end, the V plug, KA puck, and lighter main return spring were as good as I could get it. It's almost there...I think Cobra or Pauly will need to take it the rest of the way. Quote Link to post Share on other sites
jmzzl 146 Posted May 16, 2011 Report Share Posted May 16, 2011 It's understandable. We all know about the high manufacturing tolerances of the S12 Quote Link to post Share on other sites
MT Predator 2,294 Posted May 16, 2011 Report Share Posted May 16, 2011 Any of the testers receive their piston yet? Not yet. Still not yet. Same here. Quote Link to post Share on other sites
jmzzl 146 Posted May 16, 2011 Report Share Posted May 16, 2011 From what I hear, Mikes pretty busy. He's moving into a shop, and I'm not gonna harass him over this. Since he's being generous and letting us test them for free, I'm gonna try to be patient. This is an opportunity that I am appreciative of. Not many other vendors would ever do anything like this. I know it's been a little while, but Mike will come through. Maybe one of us should politely email his shop and check in on them? I know he doesn't have much time to get on the forums. Again, I'm not mad, just anxiously waiting lol. Still, props to MD. 1 Quote Link to post Share on other sites
MT Predator 2,294 Posted May 17, 2011 Report Share Posted May 17, 2011 From what I hear, Mikes pretty busy. He's moving into a shop, and I'm not gonna harass him over this. Since he's being generous and letting us test them for free, I'm gonna try to be patient. This is an opportunity that I am appreciative of. Not many other vendors would ever do anything like this. I know it's been a little while, but Mike will come through. Maybe one of us should politely email his shop and check in on them? I know he doesn't have much time to get on the forums. Again, I'm not mad, just anxiously waiting lol. Still, props to MD. I don't mean to harass Mike either. I'm just anxious to try it out as well. Patiently waiting. Quote Link to post Share on other sites
YOT 3,743 Posted May 29, 2011 Report Share Posted May 29, 2011 From what I hear, Mikes pretty busy. He's moving into a shop, and I'm not gonna harass him over this. Since he's being generous and letting us test them for free, I'm gonna try to be patient. This is an opportunity that I am appreciative of. Not many other vendors would ever do anything like this. I know it's been a little while, but Mike will come through. Maybe one of us should politely email his shop and check in on them? I know he doesn't have much time to get on the forums. Again, I'm not mad, just anxiously waiting lol. Still, props to MD. I don't mean to harass Mike either. I'm just anxious to try it out as well. Patiently waiting. Here, here. Patience is a virtue is what they say. Quote Link to post Share on other sites
stuken3 0 Posted May 29, 2011 Report Share Posted May 29, 2011 Mike sent me a PM about a month ago saying he would send me a booster piston for testing. I didn't ever receive anything. Judging from reading the previous comments, no one else has received anything? Just curious to see if maybe I and the booster puck slipped into the cracks somewhere? Quote Link to post Share on other sites
jmzzl 146 Posted June 19, 2011 Report Share Posted June 19, 2011 Mike sent me a PM about a month ago saying he would send me a booster piston for testing. I didn't ever receive anything. Judging from reading the previous comments, no one else has received anything? Just curious to see if maybe I and the booster puck slipped into the cracks somewhere? Mike's been busy. Give him a little time. Quote Link to post Share on other sites
fauxknight 30 Posted June 20, 2011 Report Share Posted June 20, 2011 Mike's been busy. Give him a little time. His PMs were sent on 3/24, so over 2 and a half and nearing on 3 months ago. I gave up after a couple of weeks and ordered one, got it right quick. Quote Link to post Share on other sites
slostang 80 Posted June 20, 2011 Report Share Posted June 20, 2011 (edited) Ive had a booster in my gun for a little over a month now. Havent had a chance to test it out yet. My gun only FTE's mabey 4-5 shells per 100 so im mainly hoping i can use a lower setting with the booster. stock puck i had to use setting 5 on my v-plug to get it to eject. Edited June 20, 2011 by slostang Quote Link to post Share on other sites
pony_express1973 183 Posted June 20, 2011 Report Share Posted June 20, 2011 (edited) My SBS won't cycle that stuff at all, if you want I'll test one out for you. Granted I think my ports need to be enlarged further before anything will help, but I'll still give it a go. What spenceman said I have the same issues and I'll try one out Damn I see I missed my chance......... to the guys that got one please let us know how they work I'm getting really frustrated with this and about to trow in the towel and it's a shame because i love this gun but it seems to be an expensive paper weight right now and that just sucks Edited June 20, 2011 by pony_express1973 Quote Link to post Share on other sites
storm6490 2,768 Posted June 20, 2011 Report Share Posted June 20, 2011 i have a tac-47. it never once failed to fire. no matter what i put in it, just dial it up and she runs like a german sewing machine! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.