Xpur3L0g1cX

With my ace folder converted to fold to the left I cant seem to get my mount past the hinge. Ive tried 100 timesany tthoughts?

The only interference I've had was due to the heat, but rail protectors and the afg2 helped. I have the css quad rail and it adds a bit of weight toward the front end. Not sure about the chaos

I used a 14mm crush washer off of a spark plug

My advice. Get rid if the tapco folder and put something on there that has a sling attachment.

Make sure if you go brinell use a equitip as a regular tellebrinell you have to make a dimple in the parent metal.

I just trashed mine. If kalashnikov wanted to put on in the design, he would have.

Hey thats an awesome build, love the rails with the mbuis. I was thinking about getting the tws railcover myself. The way i see it if you can advance your weapons platform for suit your needs then do it. i personally love the rails and such just not completely in love with the AR action yet or just not convinced anyway.

Thanks, its the magpul moe stock with milspec buffer tube. It folds to the left with the ace push button folder. I wanted something adjustable for length of pull and be able to fold out of the way. I know i know its an ar part on an ak and some guys are purists in that respect but i like it. As far as the sling it attaches at the folding hinge on a swivel stud. Thanks again for looking. Its quite comfortable now on to finding a rds to put on her.

Heres my recent build.

Upload it to photobucket and use the link

If it already has a factory threaded barrel, id check to see if it has a bullet guide installed. if so i believe they essentially did the 922r for you. But if not i would leave it stock or do the full conversion. That way can be sure.

Id just say gun?what gun? Wait it out see what happens. Moving is never just that easy. If your a criminal for owning an illegal gun based on appearance id say the hell with them.

Thats basically it. I cut the shroud back 5/8ths and threaded it back with the 14/1 die and then cleaned it up. I threw the crush washer on and it held the flash hider on really well. It isnt going anywhere. You just want to make sure you tighten it down to crush the washer correctly if that makes sense. Once you think its tight, try and tighten it some more. Then stop when you think it wont go anymore or line up right. You dont want to be able to screw it off with your hand.

I don't know about that brand of internal adapter but if its anything like the ace adapter you'll need a pignose that attaches to it. That way you can screw on your buffer tube like normal.

Roger that, its what I suspected. tws rail is going to be ordered. Thanks for your help

Hey guys quick question. Is it possible with the ace push button folding to the left to add and remove a scope mount rail. It looks like the folding hinge gets in the way. Im a lefty just feels more natural to the left and the sling hook is on the right that way. Thanks

Awesome thanks, now to go shoot the crap out of it

Thanks for yalls help. Heres an update so far. I went out and purchased a champion h10c 441 spark plug to get the crush washer. Those things are a pain to remove due to them not being designed to come off. I had to pry it off with a flat head then ream it out a bit with a dremel. I managed to get it on and tighten it down almost a full turn and its not budging. There is a gap between the crown and the flash hider stop on the inside. Is this normal? I took some pics, ill upload them once i figure out how.

Hey guys quick question. I cut my barrel shroud back to 5/8ths and successfully threaded my barrel. I purchased the yhm phantom flash hider. It screwed on correctly just didnt index. I am wondering if the stop on the inside of the flashhider has to come completely down on the end of the barrel. I have noticed a slight gap between the stop and the barrel. To correct this i would have to remove slightly under a quarter inch of barrel shroud and thread it farther back. Will it be ok without that? Also i need to install a crush washer to index which will bring it even farther from the stop. Any th

What Size E-clips are yall usin? I tried some and the one on the hammer pin came off during firing. Also yall have any tips to install the clip on the side of the hammer spring?

I have come to realize that when loading on a closed bolt all is needed is practice. The 5 rounder is extremely easy to load on closed bolt, The agps are a bit harder but is still fairly easy. The thing I have noticed is I can load it all day with 2 3/4 but with 3 inch I can barely even load the 5 rounder on a closed bolt. The agp is out of the question with 3" All is needed is to hook the front catch first then as your rocking back push up at the same time. works great. I still want to mod my safety for the hold open though I dont have a bolt stop if yall have an extra ill take it!

Chuck Norris

I want one what is needed to install it?