cvhanh20

I personally don't feel this a good cop, bad cop scenario, rather than a poorly executed plan from senior commanders. Sweep the area from house to house removing those in a dangerous then lock down that area for a full search. If my family was behind a no fly zone, you got to be out of you're fucking mind if you think I'm leaving their life's in the hands of guys making 39,000 a year, right!

I posed this very question on FB not a week ago! You can in full detail see and watch all the other beheading on the net and we all have out of morbid curiosity. Yet none of these have been viewable, right!!!!!!!!!!!! Total false flag........

I doubt it will cause you any problems but if you want it centered you have a couple things you can do. First check to see if the mounting hole in the gas block is centered. If it is then check for canting on the gas block, it's going to be one or the other. You can straighten the block without knocking out pins just by twisting on it. If the mount is off center and you want it centered you'll need to slot the rail mount hole over a little. I personally am very picky and would weld up the hole and move it to the center location but I realize most people don't have that option.

It varies through out the year but average has been about two months since we started making them.

Your price is in line for steel mags. for this weapon! People are just use to plastic prices. What those people aren't thinking about is, this is a banned weapon now, how long will their plastics mags last? How long will companies continue to run the plastic ones, I'll bet they'll be glad to pay 100 per mag a couple years from now................

Yes, and we can ship you screws with that just make sure you request them with customer service.

Yes we are currently shipping backorders on those, call or email support if you would like to know where you order stands on shipping.

For titans 7.62, they are round 8-12 weeks out.

Sweet!

Hi Bob! Great to see you back in here posting.

I haven't had a mini in hand but I figured it would. There's not many variants of AK it won't go on with a little work. But thanks for confirming this, are there any pics with this setup that you know of?

Here it is! http://www.chaosus.com/cgi/commerce.cgi?preadd=action&key=QUAD_SIGHTS

Maybe, we have put things on hold again to the saiga market going soft. We'll just to wait and see.

The difference between the two is one is a field strippable version. You could either with just the bottom if desired.

http://www.chaosus.com/cgi/commerce.cgi?preadd=action&key=762_TITAN_RAIL

+10

Krazylegs, you need to call customers service @ 812 250 4919 ext. 200 from 10-3 Central time and we will address whatever issue you have going on, thanks. Cam,

We are at least 8 weeks out.

They are scammers, they have no products, just stole pictures from our website.

There are rules to being a machinist, roll up your sleeves, tuck in your loose clothing, tie up long hair, no jewelry of any kind. All the guarding and E-stops can't fix carelessness. It's a very skilled trade and people that become comfortable and lax end up like this guy, hamburger meat! I've ran it all, toolroom lathes, turret lathes, CNC turning centers, machining centers, horizontal boring mills you could set a small house on the table, vertical boring mills with 100inch chucks+, to massive 500 ton lathe with 15 foot chucks that take minutes to stop. I had A Mazak slam the turret into the

I brought my workers in from the floor and showed them this! People need to reminded from time to time how dangerous these machine are. I have a manual lathe on the shop floor that same size and the guy that runs it got chills. Who knows maybe your post here will save him from a fatal mistake one day, thanks for posting!

It was brought to my attention last week that a scam website "Centerspike" is posing as a Chaos Dealer. Apparently this is not the first time they have done this, Carolina Shooters and Tromix had to deal with them last year! They are a scam and have no affiliation with our company Chaos Inc. We are working with their web host to pull them down but these things can take time, please help spread the word, thanks.

It was brought to my attention last week that a scam website "Centerspike" is posing as a Chaos Dealer. Apparently this is not the first time they have done this, Carolina Shooters and Tromix had to deal with them last year! They are a scam and have no affiliation with our company Chaos Inc. We are working with their web host to pull them down but these things can take time, please help spread the word, thanks.

Not digging all the plastic or price, but with that said, they look well designed and thought out. I didn't have time to read through everything but it looked @ a glance like the left side could be setup for ejection as well. I did see the part where the brass was just clipping his chin, that was distracting.

It's slow going at this point, but still moving forward. We have our clock springs in and waiting for a few machine to open up from production.