poolingmyignorance

I've decied the paper work isn't worth the price of the gun......maybe later.

This is perfect! Thank you sir! When I finish my 410, this is next!

I'm wanting to build a psl, with dragunov style. I've found a great kit for what seems a resonable price, complete with reveiver and trunnions, but I'm curious about 922r and how it affects this build. Puls any How To help would be awesome. Thanks in advance!

I keep the 10rnd mag Full of 3" mag 00buck, and the factory alternate of 3"00 buck, slug, ect. Got the drum ready with 2 3/4 buck.

I bought the MD 20, and V plug about a month ago. Drum ran slugs, and buck shot like a champ on setting 3, and Vplug allowed me to run winchester bulk from the factory stick on 5. Having a gun with 3 full ports I decieded a DIY polish job was in order. I started with some 180 grit and worked my way up to 220, using some mill scale jewlers files to knock sharp edges off the areas I seen wear inside the reciver and on the bolt. I took no real material away just removed paint and slicked down the surfaces as best i could by hand. Today I took out took out the drum for the first time since doing

Good stuff man!

+1 Too many people rely soley on a weapon burried in their pocket out of reach, and have no real idea of how quickly an attacker can really move. It's easy to forget that even a wounded man can still kill. Learn some hand to hand people! Oh and I carry the kel-tec pf9 isw sob, and a sig-tac neck knife everywhere i go. 10 years of jiu jitsu incase i don't have chance for either.

I would shop there!

Good investment, ps: i hate you lucky bastard! (as respectfuly hateful as possible)

I recently bought the Sig 556Russian, I'm pleased with it, I like the red dot alot. It's really acurate at 100 yrds, Sig has done some great work keeping the climb down and recoil is minimal. However it doesn't like the tula ammo much. The first round failed to eject, infact the spent casing was lodged so tight in the barrel i had to slam the bolt shut and rip it back open by hand to clear it out. After that I could only get it to operate with the valve in the number 2 position, till i fired about 6 more then it ran in no 1 for about 60 rounds till it fouled up enough to need to go back to pos

I really like this idea, though I would definately try to take some to ensure I'm not purchasing a stolen weapon. But I agree everybody should do this! Nice work, Sir!

If you have a pair of calipers, measure the valley of the threads, and round up to the nearest drill incriment to allow tolerance.

I've got the sig p250 compact 9mm, it's been great, i've ran 2000 rounds through atleast, of that 500 in one day (in about two hours) of the cheap steel cased monarch, never had a single FTF, FTE. Shoots great, great accuracy 1/2" groups at 10 yrds. Personaly i love it.

Great idea MrMitch, i'd like to do some drum dumps, how early can i show up?!!

I love high capacity mags as much as the next guy, but after seeing this thread, I WANT ONE OF THOSE BARRLE SHROUDS!!!

What is the cut off capacity for magazines to exclude them from the sporting configuration? I though I read that it only applied if "pistol type grip protrudes conspicuously below the receiver" under 922r subsection...ofcourse I'm not a lawyer and am probably wrong. I'm only curious because I've been holding out on converting. What I do know is that the local range won't let me use my saiga for skeet, no matter what configuration or magazine, those pussies! (Oh I too am in Texas, and yea most everything is legal here)

golf tee is a great idea!

I'm considering making a 410 sbs, but I'm not sure how to remove the gas tub from the reciver, and kinda curious about what the shortest length it can down to and function.

Great imput. Kinda the way i was leaning. But that leads me to my next question: what exactly is the proper port size for a 3 port 19" barrel and what is the proper way to measure the barrel correctly (from where to where)? You could try reducing the spring revolutions in the drum down to 2-2.5. I bet that will do the trick. I though I read somewhere that reducing the revoultions would make the drum unsuitable for higher loads......Maybe I'm asking for too much, but i'd like have my gun set us so that the only adjustment required when swaping ammo loads is the gas plug.

You could try reducing the spring revolutions in the drum down to 2-2.5. I bet that will do the trick. I though I read somewhere that reducing the revoultions would make the drum unsuitable for higher loads......Maybe I'm asking for too much, but i'd like have my gun set us so that the only adjustment required when swaping ammo loads is the gas plug.

Question of my own: I've got a 3 port s12, using the MD V plug, with polished bolt ( did it my self, not paulys) Since installing and polishing i can run the wally world bulk ammo out of my stock 5 rnd mag on position 5 flawlessly, but not at all with the MD 20, (having said that the MD20 runs slugs and buck excellent on setting 3, {would adding a port be over gassing?} ) Because using the stock 5 rnd i can cylcle the buck and slugs on setting 2 just fine.

I'm hoping i didn't lose it either. I emailed bjorn muller just a few days ago and he responeded quickly : "we're still rolling on everything. There's been alot to it, but there's gradually less and less in production for us to do because it's mostly done so we're going to be throwing in some extra stuff. Shipping time will be this summer but it's possible that it could be earlier at this point. I've been very critical in monitoring every process all the way to make sure all stays consistent. Thank you for your patients, your going to be getting a good product for sure. I can't see myself

Lee Harvey Oswald did it with a bolt action. All it takes is a lunatic with motivation, and oppertunity. He'll devise a weapon. While we're baning things that kill people maybe we should ground all the jets again, and force everyone to wear boxing gloves.

A friend told me about this bullpup conversion for the S12 i whent to the site, read their literature watched the videos and pre-ordered one. I was just courious if anybody else had done so and what others though of the product as a whole. <Link Removed>

Like King of the Hill said, I have the Sig 556R (Russian) fires 7.62x 39 but it's a short stroke like an AR and takes standard AK magazines. Very accurate gun too.