Azrial

I just ordered a Lone Wolf .40S&W Conversion barrel for my Glock 20 yesterday. I got a very good deal on it at $80, shipped. If it works as well as my Lone Wolf 9mm Conversion barrel for my Glock 27 I will be pretty happy. I love the 10mm, but see little reason to waste it on paper when .40S&W loads will be about the same as target loads for the 10mm. I also have the Advantage Arms .22RF Slide Conversion for it, so one why or the other, I am going to keep shooting my G20! Remember, a 10mm has more energy at the 100 yards then a .45 ACP has at the muzzle.

How is that even similar, custom ammo vs surplus ammo that can be bought for less then $100M?

The M57 Yugo is nice pistol; however I prefer my CZ-52! I have replaced the weak firing pin even thought mine was unbroken, put in a 2 Lbs Wolfe heaver recoil spring and new Harrington rollers. I have not problem keeping them in the K-zone of a man sized silhouette at 100 Yards. I do like the extra round of the Yugo compared to other TT33 variants. I also like the sights better then my CZ-52. I paid $230 for my pistol in excellent condition with tin of ammo, 2 mags, holster and cleaning kit about 4 months ago. So far I have put about 6C rounds through it. J&G has the best pri

You do not do it like that! 1. You mount the over-sized recoil pad to the stock with screws.. 2. Then you put 2 or 3 layers of blue tape around the stock to give it some protection. 3. You then dress down the overisized recoil pad with the aid of a belt sander. Be careful not to go so fast as to melt the rubber of the recoil pad. Be careful not to cut through your tape! I have made recoil pads out of old flip-flops with this method. Most recoil pads for fine shotguns are sold over-sized and sanded to a perfect contour with just this method. Now you know, GI Joe!

Exactly, of what use is your hysterical little rant? Come back when you think that you can help by discussing a problem coolly and rationally. How many people here have wrote these newly elected conservative Reps asking for a call to the BATF to point out that this particular firearm is not even a blip on the Radar when in comes to usage in crimes? The very definition of "Sporting Purpose" should have no merit in a Constitutional light. Only an idiot thinks that the colonial Founding Father's thought it necessary to write a clause in the Bill of Rights to protect a sport.

Absolutely, It is time to call your Congress Critters and ask them to rain in the BATF from passing unconstitutional ordnances.

A militant action would be nice in which we flood the offending sites with similar crap. keeping order windows open endlessly and such to minimize sales...

Wel I was speaking to a wholesale vendor who told me that they were having a sale on 5.45x39 Saigas because the RAA had been "scratched off" as they would no longer be the importer. Some might want to believe that he was lyeing, but if so he sure wanted it to be convincing, as he offered to sell me one of these altered rifles at a very good price! I asked Juggs about it at the time, but he had not heard anything either.

CNC Warrior used to have an IGS file posted for a Milled AK Fixed Stock Receiver? Did anyone download it by chance? It now 404s. If so, I would be interesed in a copy. Thanks!

"...and it makes Julian Fries and look Ladies, no tears when slicing this onion! Try that with an ordinary E-Tool! "

Out of curiosity - Your Saiga 12 takes a bottle neck 12 gauge round?

But this is a GREAT opportunity to watch these political dirtbags that support this proposed legislation. The American people have already told them, more then once, that we don't want these types of laws. The problem is of course many of the folks forget that they are "Public Servants" when they get to the Capital and start doing what they want. Keep a local tally of these folks and make sure to punish them by supporting their opposition in the next election.

On FALs the type of receivers refers to lightening cuts that were eliminated from later receivers to save cost. There are some improvements in the original Type 2 design over the Type 1 as well. I have FALs and M1As, I like both! Each design has its strengths, the FAL tipping toward reliability and ergonomics and the M14/M!A tipping toward accuracy.

Nice work! I like this mod!

But, it still looks like you made a mistake.

Pay no attention to the guys for whom the S12 is a range toy to try and prove their machismo. A good pad can aid in making the shotgun more controllable and faster back on target.

A clean build. A lot of us never have any problems with the BHO button.

You would not say that if you had any idea what unnatural things are done to a tree to make the stuff...

This is an almost impossible question to be answered correctly on the Internet. Are you using a "squared up" or Traditional rifle stance. If I was to go by the videos below I would have to say Traditional. Do you ever envision shooting while wearing heavy clothes and or body armor? Are you going to use a recoil pad. As to the cheek weld itself, there are always pads like the ITC Railrest that will correct most differences in padding or stock height. It would seem like if you have an NATO length stock now you could figure out what fits. I use the medium length Ace with a 1" recoil pad,

"Doc, I seem to have a kind of metallic taste in my mouth since my last cleaning..."

I have been following this, and all information that I can get on the RFB, with interest! I have been wanting one since before they come out, but I am the wait and see type. If not, I would have bought my first S12 for $220!

Not sure if it is actually a Saiga Mag or not, but it would make sense, the box magazine is one of the hardest parts to get right in any box-fed repeater design. Many designers take the shortcut of using an existing working design.

Another illiterate noob wasting bandwidth with comments on two subjects in which he has no real knowledge, stock design and me. Since the man has a picture as reference and asked for anyone with experience with the product of what possible use could your misspelled bit of gibberish regarding aesthetics be? Perhaps you should spend more time on your 5th grade English homework and less time here posting useless crap?

I have heard that the .308 MagPul can be used. I have heard others say that it is too tightly stretched. Obviously, I have never got to try one.

I have the top one on one of my AKs. A very nice unit for the money and they are a great company to deal with. Any moment now some moron will be along to tell you that he thinks that the tang extension is ugly. If this or his opinion is important to you, don't get it.