getitat 609 Posted June 3, 2008 Report Share Posted June 3, 2008 Hello As much as I enjoy and respect a semi-automatic large-caliber pistol, I feel I need a large-caliber revolver. Something that can be easily fired from a purse, pocket (ouch!) or holster, if need be. I have a .38 Ti revolver that I got for my wife, but I'm looking for a "manly" gun. I was eyballing .357/.41/.44 Magnum loads, but then I realized that up until 2-3 years ago, there were .45 ACP revolvers being made and sold by S&W, Ruger, Colt, Taurus, etc. It appears they have fallen off the market, pretty much, but I bet I could find one at a fun show. I like the idea of not having to add a new caliber to my supplies/reloading equipment. Anybody have one, or have experience with one? Or, any reasons why I should reconsider the traditional revolver calibers listed above? TIA for any advice or experiences..... Respectfully posted, guido2 in Houston Quote Link to post Share on other sites
jrance@iacwds.com 716 Posted June 3, 2008 Report Share Posted June 3, 2008 http://www.budsgunshop.com/catalog/product...oducts_id/43753 Personally I would go with the 3" Model 29 S&W Bounty Hunter for $575 delivered in a .44 Magnum. The reason for this is that .45ACP in a revolver requires you to use half moon plates that slow down your reload. To me it doesn't seem worth the trade off. However, You can find Smith & Wesson .45ACP Revolvers at the same place for about $300 more if that is your hearts desire. 1911 Quote Link to post Share on other sites
nalioth 405 Posted June 3, 2008 Report Share Posted June 3, 2008 The reason for this is that .45ACP in a revolver requires you to use half moon plates that slow down your reload. They make full clips, also. They are a damn sight faster on the reload. Quote Link to post Share on other sites
jrance@iacwds.com 716 Posted June 3, 2008 Report Share Posted June 3, 2008 The reason for this is that .45ACP in a revolver requires you to use half moon plates that slow down your reload. They make full clips, also. They are a damn sight faster on the reload. Things have improved since I used a .45acp revolver then. Quote Link to post Share on other sites
banshee 69 Posted June 3, 2008 Report Share Posted June 3, 2008 (edited) HelloAs much as I enjoy and respect a semi-automatic large-caliber pistol, I feel I need a large-caliber revolver. Something that can be easily fired from a purse, pocket (ouch!) or holster, if need be. I have a .38 Ti revolver that I got for my wife, but I'm looking for a "manly" gun. I was eyballing .357/.41/.44 Magnum loads, but then I realized that up until 2-3 years ago, there were .45 ACP revolvers being made and sold by S&W, Ruger, Colt, Taurus, etc. It appears they have fallen off the market, pretty much, but I bet I could find one at a fun show. I like the idea of not having to add a new caliber to my supplies/reloading equipment. Anybody have one, or have experience with one? Or, any reasons why I should reconsider the traditional revolver calibers listed above? TIA for any advice or experiences..... Respectfully posted, guido2 in Houston if you want "manly" try a Ruger Super Redhawk Alaskan in 454 Casull. I have played around with the old S&W .45 ACP revolvers. They shoot ok, I just don't care for the half moon clips. If you load you own ammo .45 rimed cases works alot better. Edited June 3, 2008 by Banshee Quote Link to post Share on other sites
killasoundz 0 Posted June 3, 2008 Report Share Posted June 3, 2008 How big is your pocket. Im sure they have purses big enough and also holsters. Quote Link to post Share on other sites
BobAsh 582 Posted June 3, 2008 Report Share Posted June 3, 2008 I've shot Tonys 500 smith many times. I'm not really a revolver guy, though. Quote Link to post Share on other sites
getitat 609 Posted June 3, 2008 Author Report Share Posted June 3, 2008 Hello, Banshee Hmmm....I don't know if I need to be THAT manly.... I do load my own, though...Which was one reason I was hoping to stay with hardware and components that I already have. I assume some rimmed-type brass would get me in the park? TIA, guido2 in Houston HelloAs much as I enjoy and respect a semi-automatic large-caliber pistol, I feel I need a large-caliber revolver. Something that can be easily fired from a purse, pocket (ouch!) or holster, if need be. I have a .38 Ti revolver that I got for my wife, but I'm looking for a "manly" gun. I was eyballing .357/.41/.44 Magnum loads, but then I realized that up until 2-3 years ago, there were .45 ACP revolvers being made and sold by S&W, Ruger, Colt, Taurus, etc. It appears they have fallen off the market, pretty much, but I bet I could find one at a fun show. I like the idea of not having to add a new caliber to my supplies/reloading equipment. Anybody have one, or have experience with one? Or, any reasons why I should reconsider the traditional revolver calibers listed above? TIA for any advice or experiences..... Respectfully posted, guido2 in Houston if you want "manly" try a Ruger Super Redhawk Alaskan in 454 Casull. I have played around with the old S&W .45 ACP revolvers. They shoot ok, I just don't care for the half moon clips. If you load you own ammo .45 rimed cases works alot better. Quote Link to post Share on other sites
banshee 69 Posted June 3, 2008 Report Share Posted June 3, 2008 Hello, Banshee Hmmm....I don't know if I need to be THAT manly.... I do load my own, though...Which was one reason I was hoping to stay with hardware and components that I already have. I assume some rimmed-type brass would get me in the park? TIA, guido2 in Houston The .45 Auto Rim cartridge was designed to eliminate the need for the clips. The cartridge came along in the 1920s when surplus 1917 Colt and S&W revolvers were plentiful and cheap. Both Remington and Winchester loaded factory ammo, but have long since discontinued it. You can use .45 ACP dies for the AR.Since tha case headspaces on the rim,cartridges can be roll crimped when the bullet has a crimping groove.If the bullet has no groove a light taper crimp will work. You will need a #8 shellholder/max cartridge length is 1.275" http://www.midwayusa.com/eproductpage.exe/...leitemid=205181 Quote Link to post Share on other sites
Dylan 0 Posted June 3, 2008 Report Share Posted June 3, 2008 How about this http://www.vincelewis.net/60magnum.html that thing is a monster. Quote Link to post Share on other sites
Dylan 0 Posted June 3, 2008 Report Share Posted June 3, 2008 (edited) I also was going to say I like 44mags, also a buddy's brother has a 460 S&W it has the 10" or so barrel but I was impressed with that gun he load every thing to the max and the recoil was not that bad. Edited June 3, 2008 by OrRedbeard Quote Link to post Share on other sites
Azrial 1,091 Posted June 3, 2008 Report Share Posted June 3, 2008 I have an old 1917 Colt New Service that I bought for $175 years ago. I used to shoot it a lot more before I learned to use a taper crimp die for loading good .45 ACP. Quote Link to post Share on other sites
joelrod47 373 Posted June 3, 2008 Report Share Posted June 3, 2008 My 1917 Service Revolver with full-moon clips is just the thing for the .45 revolver urge........... Quick reloads, and plenty of punch.........(no blowback loss.........) Quote Link to post Share on other sites
Norseman 0 Posted June 4, 2008 Report Share Posted June 4, 2008 Super Redhawk .454 Casull!!!! How about the "Judge" from Taurus shoots .45colt or .410shot, now thats pretty manly. Ruger also made Super Blackhawk convertible .45colt / .45acp -E Quote Link to post Share on other sites
Ronswin 26 Posted June 4, 2008 Report Share Posted June 4, 2008 I had an opportunity to use a S&W 625 in .45 ACP during a stage where we had to transition to a "guest gun" simulating a back-up revolver and I remember how it was very smooth and worked very well. The .45 ACP had very little recoil in that size frame. And as far as reloading from full moon clips being slow or cumbersome, this gentleman may disagree: Jerry Miculek with .45 ACP revolver Quote Link to post Share on other sites
BobAsh 582 Posted June 4, 2008 Report Share Posted June 4, 2008 (edited) Well, if you must absolutely win the game of one-upsmanship, there's always the 50BMG revolver... Edited June 4, 2008 by BobAsh Quote Link to post Share on other sites
madmax4x4 68 Posted June 4, 2008 Report Share Posted June 4, 2008 I like this better than the Judge. It takes 3inch .410 and 45LC the Judge will not take 3inch Mine has a smooth cylinder. I don't have a .454 casull but got to shoot one and know want to buy one Quote Link to post Share on other sites
Ruffian72 548 Posted June 5, 2008 Report Share Posted June 5, 2008 Have a S&W 625 and 610, both 4in barrel. Enjoy both, quality weapons and a little practice with moon clips very dependable. Quote Link to post Share on other sites
Norseman 0 Posted June 5, 2008 Report Share Posted June 5, 2008 I like this better than the Judge. It takes 3inch .410 and 45LC the Judge will not take 3inchMine has a smooth cylinder. I don't have a .454 casull but got to shoot one and know want to buy one What is that? I think I need one! -E Quote Link to post Share on other sites
getitat 609 Posted June 5, 2008 Author Report Share Posted June 5, 2008 Hello, Bob Now, that's a MANLY gun!!!!!! I'm thinking anybody with forearms less than Popeye's might be a candidate to bust a tooth out....... Good one! guido2 in Houston Well, if you must absolutely win the game of one-upsmanship, there's always the 50BMG revolver... Quote Link to post Share on other sites
BobAsh 582 Posted June 5, 2008 Report Share Posted June 5, 2008 (edited) lol... I need to get smaller guns, I'm runnin' out of teeth. Edited June 5, 2008 by BobAsh Quote Link to post Share on other sites
sharkbit 109 Posted June 5, 2008 Report Share Posted June 5, 2008 here ya go.... other dumb gun ideas.... http://www.reedercustomguns.com/information/stupid.htm Quote Link to post Share on other sites
buckandaquarterquarterstaff 5 Posted June 5, 2008 Report Share Posted June 5, 2008 If you reload, the true revolver cartridges tend to offer a far greater range of performance (from cowboy to OMG). The 45 acp is nice, but part of the joy of revolverhood is that you get to load up ammo for every occasion (thanks to those loooong cases). For example, a 44 mag with solid lead 44 cowboy ammo would not completely blenderize a rabbit, and the same round juiced up with quality hollowpoints would easily drop a deer in its tracks. Another advantage to the revolver cartridges is the array of leverguns that offer even more versatility. There are decent 45 carbines though, so maybe that's a toss up, but I wouldn't want to have to drop a deer with a 45 carbine at any distance. The one cartridge thing became a bit passe when autos hit the market, but it's still awfully fun. Most turret presses will churn out decent ammo at a good pace. Quote Link to post Share on other sites
RangerM9 1 Posted June 6, 2008 Report Share Posted June 6, 2008 I like this better than the Judge. It takes 3inch .410 and 45LC the Judge will not take 3inchMine has a smooth cylinder. I don't have a .454 casull but got to shoot one and know want to buy one Thats the Thunder 5 - 5 shots....they are big five shots though.... i handled one at a gun shot about a year ago. While i like the concept, it felt cheap.....not saying it is, but it felt that way to me.... i do like the judge though....... Quote Link to post Share on other sites
getitat 609 Posted June 7, 2008 Author Report Share Posted June 7, 2008 "Joy of revolverhood" - I like that! guido2 in Houston If you reload, the true revolver cartridges tend to offer a far greater range of performance (from cowboy to OMG). The 45 acp is nice, but part of the joy of revolverhood is that you get to load up ammo for every occasion (thanks to those loooong cases). For example, a 44 mag with solid lead 44 cowboy ammo would not completely blenderize a rabbit, and the same round juiced up with quality hollowpoints would easily drop a deer in its tracks. Another advantage to the revolver cartridges is the array of leverguns that offer even more versatility. There are decent 45 carbines though, so maybe that's a toss up, but I wouldn't want to have to drop a deer with a 45 carbine at any distance. The one cartridge thing became a bit passe when autos hit the market, but it's still awfully fun. Most turret presses will churn out decent ammo at a good pace. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.