jasecloud4 2 Posted April 17, 2010 Report Share Posted April 17, 2010 So I was chilling out at the range the other day, and realized that my S-12 was getting major hot. Yes I know that with the vertical grip on it I don't have to worry about burning my hands, but the barrel was getting kinda toasty. So I did some digging and found very little on water cooled weapons. There's a couple out there but nothing too detailed. Anybody know if it is possible to feasibly watercool a Saiga-12? Just curious. Thanks. ~Jasecloud4 Quote Link to post Share on other sites
Reverendfranz 160 Posted April 17, 2010 Report Share Posted April 17, 2010 sure, its possible. not sure i would see the point unless it was a dual barreled gattling setup on a turret, you would need a much higher rate of continual fire to justify it. just use a barrel shroud for semis if you need it, less water to carry around Quote Link to post Share on other sites
PVT Pablo 25 Posted April 17, 2010 Report Share Posted April 17, 2010 So I was chilling out at the range the other day, and realized that my S-12 was getting major hot. Yes I know that with the vertical grip on it I don't have to worry about burning my hands, but the barrel was getting kinda toasty. So I did some digging and found very little on water cooled weapons. There's a couple out there but nothing too detailed. Anybody know if it is possible to feasibly watercool a Saiga-12? Just curious. Thanks. ~Jasecloud4 Well, unless you have a tripod/bipod to mount to, a full water jacket would weigh as much as the shotgun itself; not practical. I don't think you could fire enough 12 gauge through a saiga to even reach temperatures of a machine gun. Now, if you could figure a way to make the Saiga 12 belt fed, than maybe it would have a use haha. Quote Link to post Share on other sites
csspecs 1,987 Posted April 17, 2010 Report Share Posted April 17, 2010 I just bring a few bottles of water and cool the barrel every mag or so. Just remember to dry and oil the gun or it WILL rust. Quote Link to post Share on other sites
ChileRelleno 7,071 Posted April 17, 2010 Report Share Posted April 17, 2010 Been watching HBO's The Pacific? The M1917 Browning was, and still is, the gun one thinks of when they think water cooled. Anyways, for your s12? It don't get that hot, not unless your really trying to get it that hot. In that case a bottle of water will suffice, that or piss on it. Quote Link to post Share on other sites
padenbrown 2 Posted April 17, 2010 Report Share Posted April 17, 2010 you dont have any rifling youd have to worry about saving you should be straight Quote Link to post Share on other sites
kresk 10,063 Posted April 17, 2010 Report Share Posted April 17, 2010 Beer-->urine-->douse barrel. QED. Quote Link to post Share on other sites
patriot 7,197 Posted April 17, 2010 Report Share Posted April 17, 2010 (edited) I had a 1917A1 water cooled gun. Big heavy bastard! You could boil the water in the jacket if you wanted to. Fun gun, but a trip to the range cost me $500. Edited April 17, 2010 by patriot Quote Link to post Share on other sites
mgconnor13 206 Posted April 17, 2010 Report Share Posted April 17, 2010 yeah water cooling really isn't practical unless you plan to use you S-12 as a crew served weapon in a support by fire position.... Could wrap a wet cloth around the barrel, I guess that would make it "water cooled" Quote Link to post Share on other sites
Eric Pate 478 Posted April 17, 2010 Report Share Posted April 17, 2010 IIRC I think that improvements in metallurgy made water jackets largely uneccessary after the 1917 Browning. I think thats why the 1919 is air-cooled. Anybody else heard this or am I talking out my ass? Quote Link to post Share on other sites
diamondback 56 Posted April 17, 2010 Report Share Posted April 17, 2010 Actually, this was covered on "Lock and Load" yesterday--the heavy water-jacket is for a fixed position and continuous firing, the lighter air-cooled was meant for short bursts--say 3-5 rounds--under relatively mobile conditions like amphibious-assault and infantry-support. M1919 would be near the front in a Company Weapons Platoon, M1917 would probably be more likely found in a Division Weapons Company back near HQ. Quote Link to post Share on other sites
patriot 7,197 Posted April 17, 2010 Report Share Posted April 17, 2010 There are still water cooled 50 BMGs in use. Quote Link to post Share on other sites
padenbrown 2 Posted April 17, 2010 Report Share Posted April 17, 2010 There are still water cooled 50 BMGs in use. where would there be a watercooled 50 Quote Link to post Share on other sites
Bvamp 604 Posted April 17, 2010 Report Share Posted April 17, 2010 I know of a project incorporating a water cooled design, actually.... maybe I should give a call and check progress.... Quote Link to post Share on other sites
patriot 7,197 Posted April 17, 2010 Report Share Posted April 17, 2010 There are still water cooled 50 BMGs in use. where would there be a watercooled 50 50 cal Quote Link to post Share on other sites
padenbrown 2 Posted April 17, 2010 Report Share Posted April 17, 2010 There are still water cooled 50 BMGs in use. where would there be a watercooled 50 50 cal soooo....wheres the watercooled 50 thats still in use, it said that early varients were watercooled....... Quote Link to post Share on other sites
patriot 7,197 Posted April 17, 2010 Report Share Posted April 17, 2010 I never said who was using one... they're still around. Quote Link to post Share on other sites
jasecloud4 2 Posted April 17, 2010 Author Report Share Posted April 17, 2010 Wow...this topic took off fast. As to the water cooled .50, being in Kentucky (note: but not a Kentuckian...lol) we have the Knob Creek Machine Gun shoot twice a year and theres a guy who shows up with his... As to the S-12 and belt feeding you beat me to the punch on that. Why hasn't anyone taken an RPD style action and tried to run it on a S-12? Yeah I know a lot of work, time, and money would have to go into it...but I would buy one...and I'm sure others would as well. Crew served twelve guage...that would definitely scare the neighbors off... ~Jasecloud4 Quote Link to post Share on other sites
G O B 3,516 Posted April 17, 2010 Report Share Posted April 17, 2010 You could wrap the barrel in 1/8" copper or aluminum tubing, use quick connect fittings and rubber hoses along with a water can and a small pump. Awesome project - using a PUMP to PIMP an S-12! Quote Link to post Share on other sites
jasecloud4 2 Posted April 18, 2010 Author Report Share Posted April 18, 2010 You could wrap the barrel in 1/8" copper or aluminum tubing, use quick connect fittings and rubber hoses along with a water can and a small pump. Awesome project - using a PUMP to PIMP an S-12! What about rust...what kind of finish would I have to re-coat the barrel with? It's a good idea though...might actually have to try something like that lol... Quote Link to post Share on other sites
teddyraynelson 2 Posted April 18, 2010 Report Share Posted April 18, 2010 It would be way cheaper and easier to have your barrel coated with ceramic type exhaust/heat coating. Theres a powder coat shop I use that coats the headers, intakes, floor panels, and heat shields that I've built. They actually have a black ceramic coating that I think would look insane on a gun. But, I know what it's like to have a mind that wanders, water cool that shit and post some pics. You can do it. That s 12 would be able to shoot 3 inch magnum all day. Quote Link to post Share on other sites
jasecloud4 2 Posted April 18, 2010 Author Report Share Posted April 18, 2010 I've considered this thoroughly and now I just have to say: why the F*** not? Send me a message with that guys info for ceramic coating. Now I've got to go to Lowes/Home Depot/Local-Redneck-Hardware-store-down-the-street for pipes and fittings. I thing I might be able to get my old watercooling pump from my desktop computer kit working...lol...it'll be a few days till it's ready. Will post pics and vid when I'm done...lol... Quote Link to post Share on other sites
patriot 7,197 Posted April 18, 2010 Report Share Posted April 18, 2010 (edited) You don't need a pump the water itself will limit temps to 212 degrees. My 17A1 didn't have a pump, or need one, even after a 200rd belt dump. You won't need water cooling until you have a large enough ammo capacity, like with a belt or hopper feed. ..now a 200rd belt/hopper fed 12ga would be REALLY cool! THEN you could add the water jacket. Edited April 18, 2010 by patriot Quote Link to post Share on other sites
pyrostevo 2 Posted April 18, 2010 Report Share Posted April 18, 2010 I saw a 50 on gunbroker a while back that came with air cooled an water cooled barrels... Not to derail of course lol... Quote Link to post Share on other sites
jasecloud4 2 Posted April 19, 2010 Author Report Share Posted April 19, 2010 You don't need a pump the water itself will limit temps to 212 degrees. My 17A1 didn't have a pump, or need one, even after a 200rd belt dump. You won't need water cooling until you have a large enough ammo capacity, like with a belt or hopper feed. ..now a 200rd belt/hopper fed 12ga would be REALLY cool! THEN you could add the water jacket. 212F is still pretty hot...what about using anti-freeze coolant mix, to prevent rust? Quote Link to post Share on other sites
G O B 3,516 Posted April 19, 2010 Report Share Posted April 19, 2010 Water boils at 212 degrees, BUT WW1 guns used a huge water jacket to provide the MASS to absorb that much heat. A system using small diameter tubing wrapped dry around the barrel will need a pump to circulate water under pressure- 16 to 20 lbs or so. Otherwise the water will become steam and provide little cooling action. A garden sprayer would work as a water source/pump. Quote Link to post Share on other sites
Paulyski 2,227 Posted April 19, 2010 Report Share Posted April 19, 2010 (edited) You could wrap the barrel in 1/8" copper or aluminum tubing, use quick connect fittings and rubber hoses along with a water can and a small pump. Awesome project - using a PUMP to PIMP an S-12! What about rust...what kind of finish would I have to re-coat the barrel with? It's a good idea though...might actually have to try something like that lol... He's saying coil it around the barrel. Water wouldn't touch the barrel, only copper tubing would. Overgas the gun & use the gas system to power the pump mounted to the top of the gun & attached to the top of the pushrod? If there was a 1 way valve on the cool side of the coils, pressure from the water heating up would aid the pump so the pump wouldn't need to be all that powerful to circulate the water. Edited April 19, 2010 by Paulyski Quote Link to post Share on other sites
padenbrown 2 Posted April 19, 2010 Report Share Posted April 19, 2010 You don't need a pump the water itself will limit temps to 212 degrees. My 17A1 didn't have a pump, or need one, even after a 200rd belt dump. You won't need water cooling until you have a large enough ammo capacity, like with a belt or hopper feed. ..now a 200rd belt/hopper fed 12ga would be REALLY cool! THEN you could add the water jacket. i dumped a 1000 rounds through my saw using 15 to 20 sec bursts, caught handguard on fire, and it was raining, thers some things water cant cool Quote Link to post Share on other sites
teddyraynelson 2 Posted April 19, 2010 Report Share Posted April 19, 2010 Yeah! Caught the handguard on fire, fawking awesome. Theres a new use for the ove glove. Quote Link to post Share on other sites
shades_of_grey 1,092 Posted April 19, 2010 Report Share Posted April 19, 2010 You could wrap the barrel in 1/8" copper or aluminum tubing, use quick connect fittings and rubber hoses along with a water can and a small pump. Awesome project - using a PUMP to PIMP an S-12! What about rust...what kind of finish would I have to re-coat the barrel with? It's a good idea though...might actually have to try something like that lol... He's saying coil it around the barrel. Water wouldn't touch the barrel, only copper tubing would. Overgas the gun & use the gas system to power the pump mounted to the top of the gun & attached to the top of the pushrod? If there was a 1 way valve on the cool side of the coils, pressure from the water heating up would aid the pump so the pump wouldn't need to be all that powerful to circulate the water. Since we're not talking about an automatic weapon, let alone a crew-served machine gun, this sounds like a solution in search of a problem to me. Regardless, I very much doubt it would be worth the extra weight and bulk it would add to the shotgun. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.