So, you may think me a fool for doing this, but long ago it occurred to me that the AutoPlug upside down is equivalent to other adjustable plugs in the off "0" position with a bonus pressure relief valve. What I suspect I want is an "0.5" setting or maybe an "0.75" There is plenty of meat on that plug to make it. Let's get to modding!
Backstory: The Autoplug is almost perfect.Almost.
I love how the autoplug eliminates a mistake you can make, and I love that I don't have to play nanny when friends use my gun to make sure they have the right setting for the load. I don't like giving up the versatility of 3" mags.
I came up with a couple ways of making an improved piston and vent mechanism to the autoplug's poppet valve which could vent gas more rapidly at a higher pressure threshold, but I don't have the time tools or licenseing to do that. I did decide to try my luck right from the get go.
Initial autoplug testing befor e mods: I found that Winchester 3" magnum 15 pellet OOB such as you get at wallmart ran on the weak side of perfectly with the plug upside down. Shells kick out about 2.5-3 feet 100% of the dozen or so tested. Remington equivalent would eject weakly about 6/10 times.
I did find that running the Remington shells on the auto setting with a buffer seemed to be OK. One or two of the winchester shells caused the rebound failure this way when attempted. They were ejecting harder than I would want to do for more than a few tests.
So that lead to attempting the half measure shown here: Tac47 Autoplug GF Magnum Edition Mark 1.5 Incorporate a very shallow groove ala gunfixxer knob and clones for those few shells that are too hot for auto. They should run fine and do no harm to the gun. Now I have all the advantages of the Autoplug, and of something like the MD plug.
All shells from very weak 2.75 dram to milder 3" shells on Auto. Anything that seems hot for auto on the magnum setting.
***** 7/24/13 update. Tested and confirmed to run the slightly weaker Remmington full house 15 pellet OO Buck load on the custom ".5" setting with reasonable ejection. Design is unqualified success.I'll make sure to bring my camera battery next time I set up to do a video proof of concept***** Obviously this warrants a warning to do so at your own risk. This would clearly void any warranty that Tac47 has made.
Heres a few pic's of my S-20. Its was a limited batch of 5 guns that Tony did back a few years ago in this configuration. He said it was a pain in the a$$ and spent alot of time building them. It's just been sitting in my safe so I might be listing it in the for sale section soon, so keep an eye
I've designed several camouflage patterns since I was a child. I saw that Risky decided to make a few patterns and said to myself "why the hell not upload a few of my ideas?" No plans to produce any of the patterns unless someone decides they could do the production end of things. Maybe I could talk to the guys at Hyperstealth and see if they'd maybe want to make a few runs of some of the patterns if people like them enough on here. They seem to do short runs of specialized camo.
.jpg.7fe079a0d8fbed2dce5045ed3096efe3.jpg)
