Jump to content

gunnysmith

Member
 View Profile  See their activity

  • Content Count

    400

  • Joined

  • Last visited

 Content Type 

Everything posted by gunnysmith

  1. gunnysmith
    OMG the "extremely rare shoot around the corner model."LOL
  2. gunnysmith
    It's the MAK 90 stamped and it fits the square back receiver.
  3. gunnysmith
    It's caused by the lack of proper cool down during manufacture. Air bubbles form in the HE head.
  4. gunnysmith
  5. gunnysmith
    Send it back and get the Rusky mount the type you have is the not so easy on/ off
  6. gunnysmith
    Shoot a group with it in and then a group without it. See if there is a difference.
  7. gunnysmith
    I kept one weapon. A Zulu assault weapon.
  8. gunnysmith
    Obama Bumper Stickers
  9. gunnysmith
    By the way, All caps on the internet is like yelling in a library. Not generally accepted and makes it difficult to read.
  10. gunnysmith
  11. gunnysmith
    Those type sights are for short ranges. Think about what you are doing, starting with a more narrow field of view when magnifying. That alone defeats the purpose of the sight.
  12. gunnysmith
    Glad every is finally working out
  13. gunnysmith
    The Ruskies phucktem on the deal, they are working on it.
  14. gunnysmith
    These are the trigger guards off a stock Saiga They have nothing to do with the selector stop The safety stop or selector stop is under the magazine latch. It's the piece at the bottom of the picture
  15. gunnysmith
    Are you replacing the trigger guard or re-using the Saiga. If you are using the Saiga mag latch and repositioning the trigger guard, you don't need to remove the mag catch. The part you are talking about is under the mag catch, not a part of the old trigger guard.
  16. gunnysmith
    Leave it in. The safety stop plate is also what determines the rear height of the magazine at the mag latch in relation to the bolt.
  17. gunnysmith
    Its a 12. It doesnt use bullets... Before I converted it fired and ejected everything in Gas position 1. Now if I am firing the light loads on 1 the bolt returns before the shell has been completely ejected That was the first hint it was a shotty. Others will have to help on this one I'm not a shotgunner.
  18. gunnysmith
    The safety stop plate is also what determines the rear height of the magazine at the mag latch in relation to the bolt.
  19. gunnysmith
    No bullet guide? Are you using the original mag or military. Does out the door mean ejection port? Does the hammer reset?
  20. gunnysmith
    What all have you done. Trigger group bullet feed etc
  21. gunnysmith
    Replacing the Saiga hammer spring presents a problem as noted below. It's the short hammer spring leg on a Saiga for the BHO that must be noted by the person doing the conversion.
  22. gunnysmith
  23. gunnysmith
    That's why I suggested the Catepillar(as in bulldozer) graphite. It's dry in seconds and doesn't gum up. I also use it inside magazines and on springs and followers.
  24. gunnysmith
    Like that Cobra?
  25. gunnysmith
    In a .45 ACP a 200 gr bullet is into the bore about 1" from just the primer alone. My powder measure hung up on a progressive loader. To the range with a 3/8 wooden dowel a plastic mallet and about 75 rounds of .45 ACP. Shoot click hammer the slug out, Shoot click hammer the slug out, Shoot click hammer the slug out. There were about 10 rounds with no powder.
×
×
  • Create New...