Jump to content

Rottieman33

Member
 View Profile  See their activity

  • Content Count

    175

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Rottieman33

  1. Rottieman33

    Had to put my Rottweiler of 8 years down yesterday. Had to be the worst day of my life

    1. Spartacus

      Spartacus

      Sorry dude... we lost our Rottie too. She was a great dog.

    2. corbin

      corbin

      Man, that sucks. Sorry to hear about your loss. They're like family.

    3. unclejake

      unclejake

      I've had to do that three times in the last four years...tore my heart out each time. I still think of them and tear up.

    4. Show next comments  9 more
  2. Rottieman33
    988
  3. Rottieman33
    RCBS all the way Life time warranty. You break something call them up and they will replace it for free, best costumer service out there. I load everything with a single stage press. I have seen to many people screw up with progressive presses, I will not get one.
  4. Rottieman33
    all depends on the thickness of the plate. the 3/8" plate when I cut it using a oxygen/acetylene, I would make small cuts and then cool it with water so I wouldn't lose the hardness, it was the same with welding it you get it to hot and let it slowly cool down you will lose a little of the hardness. So when you weld it do about 1" then dump some water on it.
  5. Rottieman33
    All that means its approved my IPSC standards. I have worked with both metals at my job. You could get AR400 and AR500 steel plates put them side by side and shoot at them and you will see no difference. And a 338LM nothing special about that round, looked it up in my reloading manuals. And a AR in .223 cal will not even put a hole in 3/8" mild steel. AR400 steel plate 100' with my .308 didn't even dent it. 185gr. bullet, going by my book 2800fps
  6. Rottieman33
    You don't need AR500 waste of money, AR400 will do the same job. I made a target at a 100' my .308 wouldn't even dent it. http://s1216.photobucket.com/albums/dd369/Rottieman33/?action=view&current=001-12.jpg http://s1216.photobucket.com/albums/dd369/Rottieman33/?action=view&current=227272_1824310322682_1087961132_31800688_2644318_n.jpg
  7. Rottieman33
    If you still have the shell, look to see if the primer is seated all the way.
  8. Rottieman33
    Sig Sauer Rainbow Gun
    They do look better in person. If I was going to buy gun for GF/wife it would be that instead of a pink gun.
  9. Rottieman33
    Sig Sauer Rainbow Gun

    From the album: My Sig Sauer P220 Equinox

    Saw this at the Sig Sauer Store in Exeter, NH. Its to flashy for me but it looks cool
  10. Rottieman33
    Sig Sauer P220 Equinox

    From the album: My Sig Sauer P220 Equinox

    I just had to have it, It looked so pretty sitting in the case it said take me home
  11. Rottieman33

    Just bought a Sig Sauer P220 Equinox .45 ACP

    1. Rottieman33

      Rottieman33

      saw the gun loved the look and feel of it. had to have it just glade i got no wife or gf they would of killed me because of the price

    2. Fallschirmjager667

      Fallschirmjager667

      why dosn't my girlfriend bitch at me when i buy guns, should we see a doctor about that?

    3. ChileRelleno

      ChileRelleno

      Hell no, hope that its an incurable and chronic disease, that'll be carried for life.

    4. Show next comments  9 more
  12. Rottieman33
    I Live in NH I am not sure but in Mass you can convert you just can't use the Hi cap mags. No more then 5 rounds
  13. Rottieman33
    "The reason for HIGH-BRASS goes back to paper hulls. Paper hulls often produced pinhole burn-through(s) parallel to hull powder containment section. When the powder amount was higher than the brass section a burn through could occur. Magnum (additional powder height) paper shot shells were made with a higher brass head to protect against burn through. In those days of past it was not a gimmick but a necessity. I suspect ammo companies continue to use high brass because marketing surveys have told them customers associate high brass with power". I reload all my ammo and use all low brass for sl
  14. Rottieman33

    Everyone who pays taxes should get a picture of the family they're supporting

    1. termite

      termite

      The photo album would be taller than the tax code, and would have be hauled around on flat bed trailer.

    2. SaigaKen

      SaigaKen

      They would tax your photo

    3. Admiral Dennis Blair

      Admiral Dennis Blair

      doesn't appear to be a family but I support millions of skeeves

    4. Show next comments  9 more
  15. Rottieman33
    I use my reloads of bird shot #8 1 1/8 ounce load thats like 400+ pellets coming at you at a speed of 1479 FPS. And at 10-20 feet your dead because the average hight of a person is 5-6 feet so your going to either get it in the head or the neck or both.
  16. Rottieman33

    In the 80's we had Reagan in office. We also had Bob Hope and Johnny Cash. Now we have Obama in office and no Hope and no Cash.

    1. CPF

      CPF

      I hear ya. We need another Reagan.

  17. Rottieman33
    500 Yards

    From the album: Saiga12

    There is a steel target in the pic if you look close enough
  18. Rottieman33

    What a fun day got to shoot a AR-10 .308 caliber that had a silencer on it

    1. stnls1911

      stnls1911

      Were you shooting sub-sonic ammo?

    2. Rottieman33

      Rottieman33

      Shooting just 308 not sure if it was sub sonic don't think it was

  19. Rottieman33

    Farting when you piss is not multi-tasking!

    1. ThirtyAughtSix

      ThirtyAughtSix

      Pauly: ever have a strand of onion hangin out the hole? Happened to my buddy once, and possibly to me :)

    2. Spartacus

      Spartacus

      Is that like when the dog eats string?

    3. jmzzl

      jmzzl

      No, but compensating the trajectory of the urine stream due to the release of the fart is multitasking.

    4. Show next comments  9 more
  20. Rottieman33

    Saiga 12 converted with 3" slug round makes a nice 6" hole in granite. http://s1216.photobucket.com/albums/dd369/Rottieman33/?action=view¤t=002-14.jpg

  21. Rottieman33

    My house is protected by the law offices of: Remington, Winchester, and Mossberg. A subsidiary of Smith and Wesson law firm.

    1. ShadowFire

      ShadowFire

      amen

  22. Rottieman33
    As long as its not cracked you can reload it. Cause next time you fire it the dent will come out. I have gotten 308 brass from range that was worse then those 3 pieces and reloaded it.
  23. Rottieman33
    Contact this guy he makes great barrel shrouds 1alumalite http://i1216.photobucket.com/albums/dd369/Rottieman33/100_1618.jpg
  24. Rottieman33

    Did a little hunting today with Saiga 12 my sister in law is scared of chip munks

  25. Rottieman33

    Love People that don't reload got 310 pieces of 40 S&W, 113 pieces of 45 Auto, about 400 of 9 MM and couple odd ones.

    1. ShadowFire

      ShadowFire

      Yeah I'm eventually gonna reload, I hear ya. I smile lookin at the bucket at the range everytime. It's gonna be fun. :)

×
×
  • Create New...