john_doe 0 Posted January 17, 2009 Report Share Posted January 17, 2009 (edited) Just until I can afford a real pistol grip conversion. Edited January 18, 2009 by john_doe Quote Link to post Share on other sites
DL762AP 0 Posted January 17, 2009 Report Share Posted January 17, 2009 I updated mine with a handguard and reddot Quote Link to post Share on other sites
nismobishi 0 Posted January 18, 2009 Report Share Posted January 18, 2009 (edited) Nismobishi, that's the nicest Romanian furniture i've ever seen. Also, can you tell me how those 10/30 mags are blocked? I'm sure they can be converted back to full capacity with a little effort. well there are many threads about this and some believe it is ok and some dont. i personally have mine blocked by a large rivet in the rear seam of the housing and a small rivet in the side between the indented verticle lines. i feel comfortable with their sturdyness as i have tested one mag by sliding down the follower with a chisel and baning it against the rivets with a hammer, they did not budge. if you wanted to you could weld over the rivets and if you want to go even further you can weld the floor plate shut too. thanks for the wood comment, i thought i would get knocked for using romy wood on a saiga;) Edited January 18, 2009 by nismobishi Quote Link to post Share on other sites
nismobishi 0 Posted January 18, 2009 Report Share Posted January 18, 2009 I updated mine with a handguard and reddot gotta love the red dot!!! gonna get me on when im done with the ar15. Quote Link to post Share on other sites
Coal_forge 15 Posted January 20, 2009 Report Share Posted January 20, 2009 A few Upgrades to my saiga m. Quote Link to post Share on other sites
mstranglr 9 Posted January 22, 2009 Report Share Posted January 22, 2009 Quote Link to post Share on other sites
VladTepes 160 Posted January 24, 2009 Report Share Posted January 24, 2009 (edited) aimpoint arrived.. dont plan on keeping the laser.. will replace with a flashlight, just threw it on to see how it felt there... LOOKS front heavy but feels fine.. i really like that i still have %100 useable iron sites.. Saiga 7.62 X 39 Ace Stock Ace Mounting Block Tapco SAW Pistol Grip Surefire Magazines Tapco FCG AK Retainer Plate Ultimak Gas Tube Ultimak Tri Rail Ultimak Extra Wide 30 mm Picatinny Ring Aimpoint comp m3 Edited January 24, 2009 by DamagedWorld Quote Link to post Share on other sites
Agias 0 Posted January 26, 2009 Report Share Posted January 26, 2009 ^One of the few tacticool AKs i like the look of. Quote Link to post Share on other sites
wlnt 2 Posted January 26, 2009 Report Share Posted January 26, 2009 This is the latest configuration of my third Saiga 7.62. I have come a long way from being afraid to drill the rivets out to start a conversion. Now I am pretty comfortable doing anything I have the tools for, like replacing the FSB so I could add the bayonet and muzzle brake. All I want to do now is DuraCoat or blue (depends on what it is) the areas that still need coverage. I really like the look so far. louielouie Quote Link to post Share on other sites
Big Boss 21 Posted January 28, 2009 Report Share Posted January 28, 2009 (edited) Remember me from page 13? I am 99% done, just gotta get some pre-ban AK mags and mod it to use them. Thanks to : Dinzag - for supplying the parts I needed for this conversion and being extremely, extremely helpful and friendly. Dinzag runs a top-notch business and this conversion was possible because of him. YOU RULE, DINZAG! nalioth - for so much advice, encouragement and some hardware 22 Shooter - for accepting my request that he back me up should I need it, and for his words of encouragement Kwitag on IRC - for a link to oodles of pre-94 mags ernestmayhand on Saiga-12 forums, rjs3484 on YouTube and the author of the conversion article on Cross-Conn, for their conversion information. And a big FUCK YOU to the state of New York, my rifle conforms to your pathetic Unconstitutional laws and I can't wait to get the hell out of here. Edited January 28, 2009 by Big Boss Quote Link to post Share on other sites
dillwad 0 Posted January 28, 2009 Report Share Posted January 28, 2009 And a big FUCK YOU to the state of New York, my rifle conforms to your pathetic Unconstitutional laws and I can't wait to get the hell out of here. That's it man let it out don't hold back. Not making fun of you just agreeing with you. it's crazy out there Quote Link to post Share on other sites
Lonz 1 Posted January 28, 2009 Report Share Posted January 28, 2009 Big boss , where abouts in NY are you? The hardest part is finding people who will ship pre ban mags to the state .. :-o I was at the gun show this past weekend and people were asking $45 a mag and then across the hall one had them for 17$ . lol. Quote Link to post Share on other sites
smitty12b 9 Posted January 29, 2009 Report Share Posted January 29, 2009 This is my first saiga and first conversion...The 308 is my next project Quote Link to post Share on other sites
Big Boss 21 Posted January 29, 2009 Report Share Posted January 29, 2009 Big boss , where abouts in NY are you? The hardest part is finding people who will ship pre ban mags to the state .. :-o I was at the gun show this past weekend and people were asking $45 a mag and then across the hall one had them for 17$ . lol. Ontario county. There are several sites I have found that ship steel AK magazines to NY (since steel mags are pre-ban, even the ones called "new production") http://www.44mag.com http://www.jgsales.com http://whatacountry.com/ak-47.aspx Quote Link to post Share on other sites
Paulry 50 Posted January 29, 2009 Report Share Posted January 29, 2009 This is my first saiga and first conversion...The 308 is my next project Smitty, That's nice! It would look great with a Bakelite mag! sweet! Quote Link to post Share on other sites
Teaser 0 Posted January 29, 2009 Report Share Posted January 29, 2009 (edited) Greeting all, Please welcome our most recent US citizen. Alex was sworn in an hour or so ago. He wanted to thank the fine folks at Mississippi Auto Arms Inc. for helping with his citizenship. He will be staying with me until his services are no longer required Edited January 31, 2009 by Teaser Quote Link to post Share on other sites
22_Shooter 1,560 Posted January 29, 2009 Report Share Posted January 29, 2009 Big boss , where abouts in NY are you? The hardest part is finding people who will ship pre ban mags to the state .. :-o I was at the gun show this past weekend and people were asking $45 a mag and then across the hall one had them for 17$ . lol. Ontario county. There are several sites I have found that ship steel AK magazines to NY (since steel mags are pre-ban, even the ones called "new production") http://www.44mag.com http://www.jgsales.com http://whatacountry.com/ak-47.aspx Check this thread. I gave links to Copes, who will sell/ship prebans to NY. I ordered a bunch. Some 20 rounders, some 30 rounders. http://forum.saiga-12.com/index.php?showtopic=34271 Quote Link to post Share on other sites
eadodd 0 Posted February 2, 2009 Report Share Posted February 2, 2009 Big Boss.................Don't take this wrong but you need to get yourself a real sling! Quote Link to post Share on other sites
22_Shooter 1,560 Posted February 2, 2009 Report Share Posted February 2, 2009 Remember me from page 13? I am 99% done, just gotta get some pre-ban AK mags and mod it to use them. Thanks to : Dinzag - for supplying the parts I needed for this conversion and being extremely, extremely helpful and friendly. Dinzag runs a top-notch business and this conversion was possible because of him. YOU RULE, DINZAG! nalioth - for so much advice, encouragement and some hardware 22 Shooter - for accepting my request that he back me up should I need it, and for his words of encouragement Kwitag on IRC - for a link to oodles of pre-94 mags ernestmayhand on Saiga-12 forums, rjs3484 on YouTube and the author of the conversion article on Cross-Conn, for their conversion information. And a big FUCK YOU to the state of New York, my rifle conforms to your pathetic Unconstitutional laws and I can't wait to get the hell out of here. I guess I missed this the last time I posted in here. Looks good! See, it wasn't as hard as you thought it was going to be, right? Quote Link to post Share on other sites
jrentfrow 0 Posted February 3, 2009 Report Share Posted February 3, 2009 Couple pics of my latest project Quote Link to post Share on other sites
Teaser 0 Posted February 3, 2009 Report Share Posted February 3, 2009 (edited) Couple pics of my latest project Very nice Jammer. Very nice. Can you setup to fold to the left? Edited February 3, 2009 by Teaser Quote Link to post Share on other sites
jrentfrow 0 Posted February 3, 2009 Report Share Posted February 3, 2009 Couple pics of my latest project Very nice Jammer. Very nice. Can you setup to fold to the left? Never tried to do it. I have all my saigas setup to fold right that have scopes on them. Quote Link to post Share on other sites
Teaser 0 Posted February 3, 2009 Report Share Posted February 3, 2009 Couple pics of my latest project Very nice Jammer. Very nice. Can you setup to fold to the left? Never tried to do it. I have all my saigas setup to fold right that have scopes on them. I setup to fold left so I can shoot folded. The scope mount is not in the way when folded left. You would have to open stock to remove mount. Quote Link to post Share on other sites
VladTepes 160 Posted February 4, 2009 Report Share Posted February 4, 2009 Couple pics of my latest project is that an ace internal block? if so where did you get it? im going nuts looking for it? Quote Link to post Share on other sites
jrentfrow 0 Posted February 5, 2009 Report Share Posted February 5, 2009 Couple pics of my latest project is that an ace internal block? if so where did you get it? im going nuts looking for it? Yep that's an internal. I ordered them direct from ACE in Dec. and received them middle of January. Came from a partial batch they received. Quote Link to post Share on other sites
DrWho 10 Posted February 7, 2009 Report Share Posted February 7, 2009 Couple pics of my latest project is that an ace internal block? if so where did you get it? im going nuts looking for it? What Rail is that? Quote Link to post Share on other sites
jskron 0 Posted February 8, 2009 Report Share Posted February 8, 2009 (edited) I have a few parts that i'm still waiting on (caa butt stock and some rail guards) but heres were its at now. The DPH tri-rail is rock solid. Edited February 8, 2009 by jskron Quote Link to post Share on other sites
Relorian 0 Posted February 10, 2009 Report Share Posted February 10, 2009 Its got a Tapco trigger group and gas piston, Pro-Mag 30 rounder. I plan to add a gaili style charging handle later, maybe a bullet trunion so i can use military mags. Only thing I am NOT happy with is the front sling piece. It doesnt seem to want to stay in its factory holes and falls out alot. Anyone got suggestions on what I can replace it with while maintaining the current stock foregrip? (i plan to replace it later with wood but thats a ways off with the current budget) Quote Link to post Share on other sites
VladTepes 160 Posted February 13, 2009 Report Share Posted February 13, 2009 Saiga 7.62 X 39 ACE Stock Tapco Saw Pistol Grip ACE Internal Block Tapco FCG Surefire 15 Round Magazines (NJ Limit) Ultimak Gas Tube Ultimak Tri Rail Ultimak Rail covers Aimpoint Comp M3 2MOA Reflex Sight (NVC) Aimpoint 30mm Picantinny Ring Quote Link to post Share on other sites
SJgunguy 5 Posted February 14, 2009 Report Share Posted February 14, 2009 (edited) Tapco G2 FCG K-var butt stocks Tapco Galil hand guards Monster man grips Mags I got a long time ago, I don't remember where they're from Brownells aluma hyde finish on both guns These are my twins. Yes I am in California.......no I have not broken any laws.........yes these are 100% LEGAL............I don't hear the sky falling yet........... Edited February 14, 2009 by SJgunguy24 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.