TonyRumore 1,332 Posted July 25, 2008 Report Share Posted July 25, 2008 I just spoke to Mike D. He has 120 main bodies molded and they came out fantastic. They are going to switch over to running the smaller piece parts next week so he can get complete production drums together and out the door. More bodies and piece parts will follow shortly after that. I have no other information. Tony Rumore Tromix Corp Quote Link to post Share on other sites
mscottrogers 56 Posted July 25, 2008 Report Share Posted July 25, 2008 I just spoke to Mike D. He has 120 main bodies molded and they came out fantastic. They are going to switch over to running the smaller piece parts next week so he can get complete production drums together and out the door. More bodies and piece parts will follow shortly after that. I have no other information. Tony Rumore Tromix Corp thank you Quote Link to post Share on other sites
weaponx 18 Posted July 25, 2008 Report Share Posted July 25, 2008 THANK YOU TONY ! you have always been a standup guy. it is nice to read posts like this then bitch this ,asshole that, and don,t let me forget whine whine whine. thanks again ....hope you have a nice weekend. Quote Link to post Share on other sites
gtnichols 51 Posted July 25, 2008 Report Share Posted July 25, 2008 Well that's the best news I have heard all damn day! :devil: :devil: Quote Link to post Share on other sites
gixser 0 Posted July 25, 2008 Report Share Posted July 25, 2008 Thanks Tony, By the way I ended up picking up one of your earlier conversion and she is still kicking out hulls like no tomorrow Quote Link to post Share on other sites
Berszerk 0 Posted July 25, 2008 Report Share Posted July 25, 2008 (edited) Thanks Tony, I know were getting close Edited July 25, 2008 by Berszerk Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted July 25, 2008 Report Share Posted July 25, 2008 THANK YOU TONY ! you have always been a standup guy. it is nice to read posts like this then bitch this ,asshole that, and don,t let me forget whine whine whine. thanks again ....hope you have a nice weekend. It must be nice to be able to give a good first hand report like that Tony. That is something I have longed to be able to do myself for a LONG TIME, but instead all I get to do is be the bad guy and try to keep all these whining assholes from taking over this whole forum. Mike, for reasons I'm still trying to figure out, has chosen to stop talking to me and let Tony be the bearer of all good news. All I get to do is spread the same old bad news and be everyone's enemy....Thanks Mike. Tony = HERO Cobra = ? Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted July 25, 2008 Report Share Posted July 25, 2008 Well what do ya know..my phones ringing.... Quote Link to post Share on other sites
Bayoupiper 738 Posted July 25, 2008 Report Share Posted July 25, 2008 THANK YOU TONY ! you have always been a standup guy. it is nice to read posts like this then bitch this ,asshole that, and don,t let me forget whine whine whine. thanks again ....hope you have a nice weekend. It must be nice to be able to give a good first hand report like that Tony. That is something I have longed to be able to do myself for a LONG TIME, but instead all I get to do is be the bad guy and try to keep all these whining assholes from taking over this whole forum. Mike, for reasons I'm still trying to figure out, has chosen to stop talking to me and let Tony be the bearer of all good news. All I get to do is spread the same old bad news and be everyone's enemy....Thanks Mike. Tony = HERO Cobra = ? ...Did someone say whinning?????? Quote Link to post Share on other sites
ClickClickD'oh 1 Posted July 25, 2008 Report Share Posted July 25, 2008 Hot damn, that's good news to hear. Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted July 25, 2008 Report Share Posted July 25, 2008 Hey Will... Did you go to the same school as Drew? lol Quote Link to post Share on other sites
Bayoupiper 738 Posted July 25, 2008 Report Share Posted July 25, 2008 Well, it USED to work and then just quit one day! Quote Link to post Share on other sites
Paladin 37 Posted July 25, 2008 Report Share Posted July 25, 2008 Thanks for the update Tony. I, for one, will be SO happy when the drums start shipping. Not just to get mine, but just so we can all move on to our next forum crisis. No hitting please. Quote Link to post Share on other sites
jrance@iacwds.com 716 Posted July 25, 2008 Report Share Posted July 25, 2008 (edited) Thanks for the info Tony. And most of all thanks to our HERO Moderators for keeping things together for us. Especially Cobra 76 two! Three cheers for the home team. 1911 and thanks to those who don't like 1911's for not flaming me in the other thread. Edited July 25, 2008 by 1911 Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted July 25, 2008 Report Share Posted July 25, 2008 Has anyone except me noticed how, the higher capacity a "new upcoming" 12 ga mag is, the more shitstorms and negativity there are to deal with here on the forum? Remember the AGP pre production thread nightmares? I do. I'm begging you other mag makers out there...PLEASE, PLEASE don't make any more mags that hold any more than what's already out there! And if you do make them, PLEASE do not utter one word about them until you actually have them for sale! As bad as I hate to say anything good about alliance armament and their drums, at least they apparently kept their mouths shut about their pizza pan mag til it was ready. Quote Link to post Share on other sites
USP40 1 Posted July 25, 2008 Report Share Posted July 25, 2008 THANK YOU TONY ! you have always been a standup guy. it is nice to read posts like this then bitch this ,asshole that, and don,t let me forget whine whine whine. thanks again ....hope you have a nice weekend. It must be nice to be able to give a good first hand report like that Tony. That is something I have longed to be able to do myself for a LONG TIME, but instead all I get to do is be the bad guy and try to keep all these whining assholes from taking over this whole forum. Mike, for reasons I'm still trying to figure out, has chosen to stop talking to me and let Tony be the bearer of all good news. All I get to do is spread the same old bad news and be everyone's enemy....Thanks Mike. Tony = HERO Cobra = ? Cobra I still love you man. he he he really Thanks for putting up with us. Quote Link to post Share on other sites
Eric Pate 478 Posted July 25, 2008 Report Share Posted July 25, 2008 I just spoke to Mike D. He has 120 main bodies molded and they came out fantastic. They are going to switch over to running the smaller piece parts next week so he can get complete production drums together and out the door. More bodies and piece parts will follow shortly after that. I have no other information. Tony Rumore Tromix Corp So THERE! Suck on that, you Naysayers! BTW: Cobra you are still my hero, brother! Don't let the bastards get you down! Quote Link to post Share on other sites
John_pro2a 3 Posted July 25, 2008 Report Share Posted July 25, 2008 I'm begging you other mag makers out there...PLEASE, PLEASE don't make any more mags that hold any more than what's already out there! And if you do make them, PLEASE do not utter one word about them until you actually have them for sale! Quote Link to post Share on other sites
SaigaNoobie 66 Posted July 25, 2008 Report Share Posted July 25, 2008 OK, now we need a 50rd drum to hit the market! Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted July 25, 2008 Report Share Posted July 25, 2008 OK, now we need a 50rd drum to hit the market! If that happens I'll trade jobs with ya saiganoobie. You can be the asshole moderator and I'll be the cl-ass clown. Same to ya John Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted July 25, 2008 Report Share Posted July 25, 2008 To the rest of y'all, thanks for the support. Quote Link to post Share on other sites
Franky 2 Posted July 25, 2008 Report Share Posted July 25, 2008 Quote Link to post Share on other sites
madmax4x4 68 Posted July 25, 2008 Report Share Posted July 25, 2008 OK, now we need a 50rd drum to hit the market! The hell with that I want to see some belt fed 12's Quote Link to post Share on other sites
uechiguy 0 Posted July 25, 2008 Report Share Posted July 25, 2008 good news - thanks for the update. Now if my s-12 would come in!!!! Patience will pay off with a real nice set-up. Quote Link to post Share on other sites
Etek 32 Posted July 25, 2008 Report Share Posted July 25, 2008 Perhaps the butthole Trolls that are spreading shit all over other gun boards will cork up now. Quote Link to post Share on other sites
nsa400 11 Posted July 25, 2008 Report Share Posted July 25, 2008 Thanks Tony! Quote Link to post Share on other sites
anatak23 0 Posted July 25, 2008 Report Share Posted July 25, 2008 Wait a damn minute... does this mean there will not be any pie? Quote Link to post Share on other sites
Bayoupiper 738 Posted July 25, 2008 Report Share Posted July 25, 2008 Just for you! Quote Link to post Share on other sites
Daemon688 0 Posted July 25, 2008 Report Share Posted July 25, 2008 Well, if there are only 120 drum molds available. And if Mike sends these out in the order they were taken. And if my memory serves correctly, I got on the list during when there was 900 something available. Then that means I'll be getting my drum before the vast majority of everyone else! I'm just hoping Mike can get them all out before the 1 year mark. Quote Link to post Share on other sites
cscharlie 107 Posted July 25, 2008 Report Share Posted July 25, 2008 Just for you! That's the kind of pie everyone was talkin about??? I thought it was the other kind. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.