plattner01 3 Posted September 17, 2012 Report Share Posted September 17, 2012 so what mods/ accessories does everyone have in store for their shotgun once they get it??? for me buy more mags and a scope for starters. Quote Link to post Share on other sites
gregomega 929 Posted September 17, 2012 Report Share Posted September 17, 2012 I plan to style it after Sergi's 3gun which is an ar stock, probably moe, a reddot, a choke and gk-01. Or I might go sbs?.? Not sure if we have a source of vepr folding action kits. Only option for a folding ar stock without perm. Mods is to use bonesteelarms folding mech. Im just gonna have the ar stock no folder. Think that's it Quote Link to post Share on other sites
obiwanbonjovi 337 Posted September 17, 2012 Report Share Posted September 17, 2012 folding stock, and cut barrel to 18" with permanent flash hider. Then maybe an RMR as funds permit. Quote Link to post Share on other sites
evlblkwpnz 3,418 Posted September 21, 2012 Report Share Posted September 21, 2012 Well, I have never even held one yet. I am considering buying a few of these. My first will likely get a permed GK-01 at just a touch over 18". I may move the gas system back on it, but it is hard to tell from pics if it would be appropriate. Second on the list will be an 8". Of course, I have some extra Russian triangle folders that I may install, but I am concerned about clearance issues with the magwell and bulged receiver. I'm not sure that I like the rail on the cover. It goes in the opposite direction of my main building philosophy (as snag free and light as possible). We shall see.... people, I am very excited and hope I can do this thing some justice. 1 Quote Link to post Share on other sites
thebuns1 4,323 Posted September 22, 2012 Report Share Posted September 22, 2012 I feel that enough justice is done since they are actually coming into country! But I'll wait until I get it in my hands before I start buying parts for it. But for now, mags. I too want an RMR for mine. Quote Link to post Share on other sites
clifton 354 Posted September 22, 2012 Report Share Posted September 22, 2012 im cutting grinding and chopping,,, with some welding and some triangle folding.. and some tefloning.. and then form 2 taddda.. 3 Quote Link to post Share on other sites
Jeluvsk 58 Posted September 22, 2012 Report Share Posted September 22, 2012 I have a box full of triangles just dieing to become a whole, also have a couple MOLOT V12 metal magwells I plan to experiment with.. just need a GK-01 and I'll be set.. maybe try to find a MOLOT V12 folding stock w/trunnion but thats probably not going to happen without years of crys. 1 Quote Link to post Share on other sites
schultze13 354 Posted September 22, 2012 Report Share Posted September 22, 2012 As of today I have a GK-01 ordered and I already have 8 factory 8rd mags for the Vepr-12 and a metal magwell as for a rear stock I will just go with a AR style non-folder for now untill Vepr stocks and trunions are available or if that does not happen maybe a SVDS style saiga stock if it is possible I am unsure if the front latch will work with the bigger front trunion. Hell I am just happy they are coming in. Quote Link to post Share on other sites
evlblkwpnz 3,418 Posted September 22, 2012 Report Share Posted September 22, 2012 (edited) im cutting grinding and chopping,,, with some welding and some triangle folding.. and some tefloning.. and then form 2 taddda.. I'm looking forward to pics!.... and getting a couple of VEPRs from you guys. I just realized we are at the end of my 3rd quarter. Owner's draw! Edited September 22, 2012 by evlblkwpnz Quote Link to post Share on other sites
randyf 35 Posted September 30, 2012 Report Share Posted September 30, 2012 I would like to find a Vepr-12 folder and trunnion, hopefully someone will make a rail for the hand guard. And does anyone know if one of these railed FSB from K-var for the 030 would fit a Vepr? Quote Link to post Share on other sites
Makaveli913 22 Posted October 1, 2012 Report Share Posted October 1, 2012 Rpk wooden forarm !!!!!!!!!!!!!!! Quote Link to post Share on other sites
PapaZorro 401 Posted October 1, 2012 Report Share Posted October 1, 2012 (edited) Rpk wooden forarm !!!!!!!!!!!!!!! Lower need some adjusting to fit Vepr-12 anyway some guys in Russia change plastic with picatinny for wood as well as handgrip from RPK - looks cool! Edited October 1, 2012 by PapaZorro Quote Link to post Share on other sites
PapaZorro 401 Posted October 1, 2012 Report Share Posted October 1, 2012 (edited) I would like to find a Vepr-12 folder and trunnion, hopefully someone will make a rail for the hand guard. And does anyone know if one of these railed FSB from K-var for the 030 would fit a Vepr? Vepr-12 has the same, why you want to change fo K-var? Edited October 1, 2012 by PapaZorro Quote Link to post Share on other sites
sunnybean 939 Posted October 1, 2012 Report Share Posted October 1, 2012 I would like to find a Vepr-12 folder and trunnion, hopefully someone will make a rail for the hand guard. And does anyone know if one of these railed FSB from K-var for the 030 would fit a Vepr? Vepr-12 has the same, why you want to change fo K-var? The AFT imposed regulations that forbid the 1913 picatinny rail on the bottom of the front gas block. The sporterized Saiga 12 030 that came in had the picatinny rails milled off/removed. We are assuming the Vepr 12 will have the same thing done to them. So, defequisiom is asking if the diameter of the barrel at the FGB is the same on the Vepr 12 as it is on the Saiga 030 so that we can swap out the imported FGB for the railed version that KVAR is selling. Do you happen to know if there are interchangeable? Quote Link to post Share on other sites
PapaZorro 401 Posted October 1, 2012 Report Share Posted October 1, 2012 I would like to find a Vepr-12 folder and trunnion, hopefully someone will make a rail for the hand guard. And does anyone know if one of these railed FSB from K-var for the 030 would fit a Vepr? Vepr-12 has the same, why you want to change fo K-var? The AFT imposed regulations that forbid the 1913 picatinny rail on the bottom of the front gas block. The sporterized Saiga 12 030 that came in had the picatinny rails milled off/removed. We are assuming the Vepr 12 will have the same thing done to them. So, defequisiom is asking if the diameter of the barrel at the FGB is the same on the Vepr 12 as it is on the Saiga 030 so that we can swap out the imported FGB for the railed version that KVAR is selling. Do you happen to know if there are interchangeable? As I know internal diameter is different 18,5 & 18,3 external is the same - Gas TUBE from Vepr12/RPK is NOT the SAME as Saiga12/AKM! So could be is not nterchangeable - have to try! Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted October 1, 2012 Report Share Posted October 1, 2012 I thought I heard they reversed their decision on rails... AGAIN. Quote Link to post Share on other sites
sunnybean 939 Posted October 1, 2012 Report Share Posted October 1, 2012 I thought I heard they reversed their decision on rails... AGAIN. Shannon, I hope you're right. I can't keep up... 1 Quote Link to post Share on other sites
randyf 35 Posted October 2, 2012 Report Share Posted October 2, 2012 (edited) Rpk wooden forarm !!!!!!!!!!!!!!! Lower need some adjusting to fit Vepr-12 anyway some guys in Russia change plastic with picatinny for wood as well as handgrip from RPK - looks cool! Maybe someone you know would be willing to sell me their plastic with picatinny. Edited October 2, 2012 by defequisimo Quote Link to post Share on other sites
Dad2142Dad 6,559 Posted October 3, 2012 Report Share Posted October 3, 2012 I am just going to keep mine stock. 1 Quote Link to post Share on other sites
echoside190 127 Posted October 3, 2012 Report Share Posted October 3, 2012 So far the plan for mine is to throw an EOTech on it and either a Tromox Mini Monster or the GK-01 and check out what the 922r is on it, swap what I need to and stock up on mags. 1 Quote Link to post Share on other sites
YoungGun 2 Posted October 3, 2012 Report Share Posted October 3, 2012 (edited) Magazines and an EOTech (I like the circle around the dot for quick sighting). Setting up and start reloading for 12ga (Gotta feed the monster). Yg Edited October 3, 2012 by YoungGun Quote Link to post Share on other sites
Thor's Hammer 33 Posted October 3, 2012 Report Share Posted October 3, 2012 Whoever is first to offer genuine Molot folder assemblies for this is going to have a license to print money. 1 Quote Link to post Share on other sites
plattner01 3 Posted October 8, 2012 Author Report Share Posted October 8, 2012 just ordered myself a molot brake Quote Link to post Share on other sites
getboth 14 Posted October 8, 2012 Report Share Posted October 8, 2012 I thought I heard they reversed their decision on rails... AGAIN. Are you serious? Source? Quote Link to post Share on other sites
echoside190 127 Posted October 9, 2012 Report Share Posted October 9, 2012 just ordered myself a molot brake Who all has these for sale right now? Quote Link to post Share on other sites
PapaZorro 401 Posted October 11, 2012 Report Share Posted October 11, 2012 I would like to find a Vepr-12 folder and trunnion, hopefully someone will make a rail for the hand guard. And does anyone know if one of these railed FSB from K-var for the 030 would fit a Vepr? If to make railed gas block in US, maybe better make something like this 1 Quote Link to post Share on other sites
PapaZorro 401 Posted October 11, 2012 Report Share Posted October 11, 2012 I would like to find a Vepr-12 folder and trunnion, hopefully someone will make a rail for the hand guard. And does anyone know if one of these railed FSB from K-var for the 030 would fit a Vepr? Vepr-12 has the same, why you want to change fo K-var? The AFT imposed regulations that forbid the 1913 picatinny rail on the bottom of the front gas block. The sporterized Saiga 12 030 that came in had the picatinny rails milled off/removed. We are assuming the Vepr 12 will have the same thing done to them. So, defequisiom is asking if the diameter of the barrel at the FGB is the same on the Vepr 12 as it is on the Saiga 030 so that we can swap out the imported FGB for the railed version that KVAR is selling. Do you happen to know if there are interchangeable? Today, on Moscow International Exhibition ARMS & Hunting 2012, I spoke with Chief Constructor of Molot Mr Sergey Urzhumtsev about Vepr-12 Saiga-12-30 Gas block interchangeability, and Sergey told me that Saiga-12-030 will fit to Vepr-12. They are 100 % interchangeable. 2 Quote Link to post Share on other sites
PapaZorro 401 Posted October 11, 2012 Report Share Posted October 11, 2012 Today, on Moscow International Exhibition ARMS & Hunting 2012, I made some pics of Vepr-12 with New left charge handle, New aluminum Mag Well, New mag release & 10 round Mag 2 Quote Link to post Share on other sites
sunnybean 939 Posted October 11, 2012 Report Share Posted October 11, 2012 Oh please let that be for import too!!! 1 Quote Link to post Share on other sites
supertex 242 Posted October 11, 2012 Report Share Posted October 11, 2012 does this have the buffer and spring ? thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.