TonyRumore 1,332 Posted December 30, 2006 Report Share Posted December 30, 2006 (edited) I whipped this up today. Tony Rumore Tromix Corp Edited December 30, 2006 by TonyRumore Quote Link to post Share on other sites
6500rpm 670 Posted December 30, 2006 Report Share Posted December 30, 2006 (edited) Well, aint that a nasty little fucker. Hey Tony, what's the link for your web picture hosting that you used to use...always had interesting stuff like this to check out. Edit-thanks for the link, that's what I was looking for. Edited December 31, 2006 by 6500rpm Quote Link to post Share on other sites
PvtPyle 0 Posted December 30, 2006 Report Share Posted December 30, 2006 That is fucking wicked dude. Now figure out to put it on a 308! Quote Link to post Share on other sites
TonyRumore 1,332 Posted December 30, 2006 Author Report Share Posted December 30, 2006 Try this. http://www.hunt101.com/showgallery.php?ppu...162&cat=500 Quote Link to post Share on other sites
IndyArms 10,186 Posted December 30, 2006 Report Share Posted December 30, 2006 All I could say the moment I saw that was "Fuckin - A" Thats sweet... standard 14X1LH threads? or can it be custom threaded ( meaning 1/2 X28 etc... as per customer request?) I guess the next big question then, sir... is HOW MUCH? And... Can I get one? Quote Link to post Share on other sites
TonyRumore 1,332 Posted December 30, 2006 Author Report Share Posted December 30, 2006 I will have pricing shortly. I plan to thread them 1/2-28, 5/8-24, and 14-1LH. Tony Quote Link to post Share on other sites
IndyArms 10,186 Posted December 30, 2006 Report Share Posted December 30, 2006 SWEET!!! :up: Quote Link to post Share on other sites
Fxds 0 Posted December 31, 2006 Report Share Posted December 31, 2006 I have the "factory" ext on the S12 barrel... I have not zipped the weld nugget due to barrel length.. but under are what ... threads.. what type and what of Tromix's breaks.. like this one, can I buy and just tack or thread on. Quote Link to post Share on other sites
Red Jacket 329 Posted December 31, 2006 Report Share Posted December 31, 2006 Thats badazzzz , I got that one you made me for the .410 , pefect fit dude Quote Link to post Share on other sites
longhunter-CO 0 Posted December 31, 2006 Report Share Posted December 31, 2006 Thats badazzzz , I got that one you made me for the .410 , pefect fit dude The first time I saw it I thought " i'm going to get mid-evil on your a$$". Quote Link to post Share on other sites
termite 463 Posted December 31, 2006 Report Share Posted December 31, 2006 I'll take 4 of them, threaded 1/2 x 28 for my S223, x39, Bush ar-15, momma's RR ar-15 and 1 more for what ever the treads are on my new V93. Just got to remove the front sight on the 308, turn down the barrel and thread for one of these. Quote Link to post Share on other sites
rwsackett 0 Posted December 31, 2006 Report Share Posted December 31, 2006 That is a thing of beauty. Love it on a .308! Excellent work (as usual) Tony! Quote Link to post Share on other sites
TEXASAK73 13 Posted December 31, 2006 Report Share Posted December 31, 2006 I'll take one or two.That would look good on my Vepr .308! Quote Link to post Share on other sites
GreggD1125 0 Posted December 31, 2006 Report Share Posted December 31, 2006 That thing hurts just looking at it! Quote Link to post Share on other sites
AK-treO8 0 Posted December 31, 2006 Report Share Posted December 31, 2006 That shark brake looks medieval, or maybe just evil. Even with no ammo you'd still have a weapon. BTW, viewing all the pics at the link he uses I think Tony wins the prize for the most bad ass sick schick accumulated, made, manufactured...whatever. Are you seeking counseling dude? Dave at Elite has some nice stuff, but Tony's is just over the top evil/cool looking. Stuff you wouldn't take home to ma cause it would scare the crap outta her. I think it's a sickness anybody that checks this forum has but you got a major dose of it Tony! Hats off!! Also, do you have any employment opportunities opening up in your shop? Quote Link to post Share on other sites
Pointer 21 Posted January 4, 2007 Report Share Posted January 4, 2007 (edited) Thats badazzzz , I got that one you made me for the .410 , pefect fit dude The first time I saw it I thought " i'm going to get mid-evil on your a$$". I thought the same thing! ... May have to get one for my SBR AR15 Post that on AR15.com and you will sell a shitload.. but only after we get ours hear first Edited January 4, 2007 by Pointer Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted January 4, 2007 Report Share Posted January 4, 2007 DAMN! That's sick Tony! You are one twisted individual. I'll have to have one of those on my .308 Vepr / Saiga conversion I'm doing now. Quote Link to post Share on other sites
40bikes 0 Posted January 4, 2007 Report Share Posted January 4, 2007 DAMN! That's sick Tony! You are one twisted individual. I'll have to have one of those on my .308 Vepr / Saiga conversion I'm doing now. When I saw it my first thought was NAME CHANGE!! : Tonan the Barbarian Rumore. Tony, you have WAY to much available free time. Maybe you should take up Pro wrestling. bikes Quote Link to post Share on other sites
BobAsh 582 Posted January 5, 2007 Report Share Posted January 5, 2007 LOL @ "Tonan the Barbarian" Quote Link to post Share on other sites
40bikes 0 Posted January 5, 2007 Report Share Posted January 5, 2007 Yeah, Bob , that door breacher is just right if you're trying to get past 6" of oak with hammered iron hardware. Makes you want to check the Kabar catalogue for a Scimitar. Quote Link to post Share on other sites
Zoub 0 Posted January 7, 2007 Report Share Posted January 7, 2007 All I could say the moment I saw that was "Fuckin - A" I said Jesus Christ...............out loud too. Quote Link to post Share on other sites
lazlong 0 Posted January 7, 2007 Report Share Posted January 7, 2007 That makes a bayonet look downright mild. Quote Link to post Share on other sites
mccumber1916 1 Posted April 25, 2007 Report Share Posted April 25, 2007 (edited) that is a fucking sexy beast any chance you can make one to fit a ruger rancher? Edited April 25, 2007 by mccumber1916 Quote Link to post Share on other sites
TonyRumore 1,332 Posted April 25, 2007 Author Report Share Posted April 25, 2007 I can thread one 9/16-24. I believe that is what is used on the Rugers. Tony Quote Link to post Share on other sites
mccumber1916 1 Posted April 26, 2007 Report Share Posted April 26, 2007 I can thread one 9/16-24. I believe that is what is used on the Rugers. Tony i'll have to get calipers and get my tip threaded is that something i need a machine shop to do or can i do it? Quote Link to post Share on other sites
bugeye 2 Posted May 2, 2007 Report Share Posted May 2, 2007 I will have pricing shortly. I plan to thread them 1/2-28, 5/8-24, and 14-1LH. Tony Tony, Will any of those sizes fit the standard thread for the Saiga 410?? That brake would be soooooo sweeeet on my 410!! Quote Link to post Share on other sites
TonyRumore 1,332 Posted May 2, 2007 Author Report Share Posted May 2, 2007 The .410 is 15mm x 1.0 L/H. I don't have a tap for that. Tony Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted May 2, 2007 Report Share Posted May 2, 2007 Johhny Gun you could take a 410 thread protector and have it pressed up inside the rear of a shark break that was milled out for it. You would also have to increase the bore size at the end of course. I had a VERY TALENTED gunsmith do this for me with a 74 brake FWIW. Quote Link to post Share on other sites
bugeye 2 Posted May 2, 2007 Report Share Posted May 2, 2007 I actually asked Tony the same question in another thread about a month ago. I was hoping something might have changed since then. Ok, so I thought I would go and by a 410 sized tap and then try to work a deal with Tony. Dang if they aren't hard to find!!!!!! I cannot find a single 15mm x 1 LH anywhere. Not that I am a machine shop type guy. I found a Left hand tap set with a 15mm tap included, but the set was $420... screw that. However just as well they were all out of stock. Yeah Cobra I think I know that gunsmith too, he also cuts great vent holes in handguards! Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted May 2, 2007 Report Share Posted May 2, 2007 I was referring to Tony Rumore. He prolly doesn't have time to do little custom stuff like that now with all his workload. Maybe you should try dinzag? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.