VanKiller 322 Posted July 22, 2010 Report Share Posted July 22, 2010 Here's the "Something Special" I promised. Works with any current production mag/drum with no modifications. Replaces the current manual BHO. One quality steel part and one replacement spring. Minimal machining, I use a milling machine, but a dremel-meister can do it. Automatically locks bolt open when the last round is fired. $150 plus $20 return shipping to the lower 48. $50 plus $5 shipping for the parts set. 7 Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted July 22, 2010 Report Share Posted July 22, 2010 Well isn't that just awesome. 2 Quote Link to post Share on other sites
VanKiller 322 Posted July 22, 2010 Author Report Share Posted July 22, 2010 Here's a bit of a vid, I was by myself and was having camera issues. 3 Quote Link to post Share on other sites
Nailbomb 10,221 Posted July 22, 2010 Report Share Posted July 22, 2010 Caught my attention... I'm assuming you have some nice instructions for the DIYers out there? Quote Link to post Share on other sites
1liter 20 Posted July 22, 2010 Report Share Posted July 22, 2010 First off, thanks for putting out a very anticipated part to all AK variants. Any photos of what will need to be done? Quote Link to post Share on other sites
VanKiller 322 Posted July 22, 2010 Author Report Share Posted July 22, 2010 First off, thanks for putting out a very anticipated part to all AK variants. Any photos of what will need to be done? Not a lot of details until the patent office at least cashes the check. It requires one groove and one slot to be cut. Both less than 1/8th inch wide. Quote Link to post Share on other sites
DrGonZo 157 Posted July 22, 2010 Report Share Posted July 22, 2010 I....MUST.....HAVE....ONE..... Quote Link to post Share on other sites
geepelton 105 Posted July 22, 2010 Report Share Posted July 22, 2010 (edited) How do we order one? Are they available now? Edited July 22, 2010 by Rangerguy Quote Link to post Share on other sites
Nailbomb 10,221 Posted July 22, 2010 Report Share Posted July 22, 2010 Quote Link to post Share on other sites
1liter 20 Posted July 22, 2010 Report Share Posted July 22, 2010 Will magazines need to be modified? Quote Link to post Share on other sites
mav 459 Posted July 22, 2010 Report Share Posted July 22, 2010 Is there a rifle version in the works? Quote Link to post Share on other sites
VanKiller 322 Posted July 22, 2010 Author Report Share Posted July 22, 2010 Will magazines need to be modified? No mods to the magazine.......... Quote Link to post Share on other sites
VanKiller 322 Posted July 22, 2010 Author Report Share Posted July 22, 2010 Is there a rifle version in the works? Yes, but a little later. 1 Quote Link to post Share on other sites
VaiFanatic90 360 Posted July 22, 2010 Report Share Posted July 22, 2010 Well, when it comes out for the rifles, I'll definitely be wanting one! Excellent work! Quote Link to post Share on other sites
gregomega 929 Posted July 22, 2010 Report Share Posted July 22, 2010 Im in. Ill take one for the s12 and one for the x39 when available. My prayers have been answered. Quote Link to post Share on other sites
shades_of_grey 1,092 Posted July 22, 2010 Report Share Posted July 22, 2010 (edited) Well isn't that just awesome. rofl. It had to happen eventually, Shannon. Edited July 22, 2010 by post-apocalyptic 8 Quote Link to post Share on other sites
SaigaKen 338 Posted July 22, 2010 Report Share Posted July 22, 2010 Dumb question:) $150 plus $20 return shipping to the lower 48....would be you installing the awesome mod on my gun? The 50 & 5 would be me installing the awesome mod on my gun? Had to ask:) Quote Link to post Share on other sites
22_Shooter 1,560 Posted July 22, 2010 Report Share Posted July 22, 2010 $150 plus $20 return shipping to the lower 48. $50 plus $5 shipping for the parts set. Just so it's clear to idiots like myself....... That's $170 for a customer to send in their S12, and for you to put the LRBHO in and ship it back to them. ...and $55 for the guys who want the parts to install it themselves, correct? Quote Link to post Share on other sites
Bvamp 604 Posted July 22, 2010 Report Share Posted July 22, 2010 I am SO going to not say anything.... Yeh, you get the gun to us, its 170 installed returned to you 55 for the parts No info till patent is in force, and Im not sure on a pre-order or line just yet. Ill ask Tom about that tomorrow, and see how he prefers to handle the 20,000 calls that are about to start. I say whore out 20 million of them under license and let the man retire comfortably already, myself....but thats just me Im shutting my cell off, stop calling me at 1am LOL you got me in trouble with the woman whoever that was.... Quote Link to post Share on other sites
csspecs 1,987 Posted July 22, 2010 Report Share Posted July 22, 2010 Cool. Now if that one planed for the rifles could hold the bolt behind the mag. That would make changing mags a little less annoying. Quote Link to post Share on other sites
Paulyski 2,227 Posted July 22, 2010 Report Share Posted July 22, 2010 (edited) BRAVO-ZULU!!!!!!! Good Job, well done!!!!!! Sign me up! Well isn't that just awesome. rofl. It had to happen eventually, Shannon. :lolol: :lolol: Edited July 22, 2010 by Paulyski 4 Quote Link to post Share on other sites
raidersfan_5544 57 Posted July 22, 2010 Report Share Posted July 22, 2010 NICE I am going to be needing some of these!!! Quote Link to post Share on other sites
Klassy Kalashnikov 1,393 Posted July 22, 2010 Report Share Posted July 22, 2010 Will this work in an un-converted S-12 or a converted gun only? Quote Link to post Share on other sites
VanKiller 322 Posted July 22, 2010 Author Report Share Posted July 22, 2010 Will this work in an un-converted S-12 or a converted gun only? This will work on any S-12 except the machine-guns. Quote Link to post Share on other sites
VanKiller 322 Posted July 22, 2010 Author Report Share Posted July 22, 2010 $150 plus $20 return shipping to the lower 48. $50 plus $5 shipping for the parts set. Just so it's clear to idiots like myself....... That's $170 for a customer to send in their S12, and for you to put the LRBHO in and ship it back to them. ...and $55 for the guys who want the parts to install it themselves, correct? Yepp, You got it. Now , I've put these in a couple random year production models. The variations are pretty much accounted for, but I will be hand forming these for now. So when ordering please let us know the first couple numbers of your sn (H08.....H06....ect) Production will be a bit slow at first, but I want to account for as much of these Bull@#^t Russian tolerances as possible. At this time I prefer to install and hand fit myself, so call Vicki at the office to get your SO number. Quote Link to post Share on other sites
hobbyshooter 59 Posted July 22, 2010 Report Share Posted July 22, 2010 I'm not supposed to spend any money but this is simply too irresistible. Can you ship the parts kit immediately or is there a wait? What form of payment do you want for the parts kit? How do I order? Quote Link to post Share on other sites
grommit666 24 Posted July 22, 2010 Report Share Posted July 22, 2010 This may be a stupid question but... does the manual BHO still work with one of these beauties installed? I never cease to be amazed by the level of ingenuity found on this forum. Izhmash should hire some of you guys. Quote Link to post Share on other sites
VanKiller 322 Posted July 22, 2010 Author Report Share Posted July 22, 2010 This may be a stupid question but... does the manual BHO still work with one of these beauties installed? I never cease to be amazed by the level of ingenuity found on this forum. Izhmash should hire some of you guys. No, the manual BHO is removed to put this in. But you could put the manual back in if you would like. Quote Link to post Share on other sites
hobbyshooter 59 Posted July 22, 2010 Report Share Posted July 22, 2010 (edited) Hm, is there a way to lock the bolt back on a gun that doesn't have a mag inserted? Edited July 22, 2010 by hobbyshooter 1 Quote Link to post Share on other sites
TO THE FLOOR IN A 63 121 Posted July 22, 2010 Report Share Posted July 22, 2010 I'm in line, I'm in line...thanks Vicki...oh and Tom too. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.