hdskumm 39 Posted March 8, 2014 Report Share Posted March 8, 2014 Those were made by DPH at one point awhile ago. http://forum.saiga-12.com/index.php?/topic/80915-choke-adapter-10-slot-brakes-coming-soon/page-2 I don't know if they were a limited run, but I was looking for them over a year ago and couldn't find them. Quote Link to post Share on other sites
vette447 11 Posted March 9, 2014 Report Share Posted March 9, 2014 (edited) Nice setup. who makes the winchoke hider you have there? Thanks. I believe it is made by DPH. I tried looking for this win choke hider....no luck. Can you remember where you bought it? Thanks!! T I think I got it from CSS but they have not had them in awhile. I bought it because I thought it looked nice and was a good idea. Then I put it in a drawer and almost for about it until I was having Legion put those guns together. The DPH was the perfect length for legality while looking like a Russian hider and still giving the option for chokes on a permanent muzzle attachment. Edited March 9, 2014 by vette447 Quote Link to post Share on other sites
TAT2 0 Posted March 9, 2014 Report Share Posted March 9, 2014 Ahhh that totally sucks. It's exactly what I would want....except an IC choke for 3 Gun! T Quote Link to post Share on other sites
warthog984 1 Posted March 23, 2014 Report Share Posted March 23, 2014 AK Builder has Saiga 12 slotted choke holders for Winchokes, but the slots are not open like the DPH to look like a flash hider. Quote Link to post Share on other sites
saltydecimator 482 Posted April 12, 2014 Report Share Posted April 12, 2014 Mine ladies proportions are all jacked up.... i wanna see some vepr wood!! Quote Link to post Share on other sites
hoevito 5 Posted April 13, 2014 Report Share Posted April 13, 2014 (edited) I lucked into one of the few remaining new 19" Vepr 12 fixed stock models on Gunbroker last week...just got it a few days ago and already dressed her up a little bit. Loving it so far With a few relatives... Edited April 13, 2014 by hoevito Quote Link to post Share on other sites
Yoshi 87 Posted April 16, 2014 Report Share Posted April 16, 2014 Throwing up some pics of my Vepr-12. 1 Quote Link to post Share on other sites
vette447 11 Posted April 16, 2014 Report Share Posted April 16, 2014 Love it, looks similar to mine. What muzzle device is on that one? Quote Link to post Share on other sites
Sdustin 578 Posted April 17, 2014 Report Share Posted April 17, 2014 Darkstar what length barrel is that? Has it been shortened? Quote Link to post Share on other sites
vette447 11 Posted April 18, 2014 Report Share Posted April 18, 2014 Darkstar what length barrel is that? Has it been shortened? Looks like the correct Russian Vepr-12 bbl length, which I think is about 17", like the guns that Legion brought in. Quote Link to post Share on other sites
Yoshi 87 Posted April 18, 2014 Report Share Posted April 18, 2014 Darkstar what length barrel is that? Has it been shortened? Looks like the correct Russian Vepr-12 bbl length, which I think is about 17", like the guns that Legion brought in. To clarify, it is a Legion model with original length barrel. Same as the two vette447 has. My OCD kicked in and I sent it back had the DPH flash hider removed and a Molot flash hider installed. To stay true to the picture thread: 2 Quote Link to post Share on other sites
Cobra 76 two 2,677 Posted April 18, 2014 Report Share Posted April 18, 2014 Mine ladies proportions are all jacked up.... i wanna see some vepr wood!! Hmmm I think I see now what I need to stop putting off.... Quote Link to post Share on other sites
Sdustin 578 Posted April 21, 2014 Report Share Posted April 21, 2014 Family photo. S308 and brand new vepr12. I love this gun. Just need higher capacity mags. Quote Link to post Share on other sites
dproctor15 11 Posted April 23, 2014 Report Share Posted April 23, 2014 Here is one of my v12s with rpk handguards 4 Quote Link to post Share on other sites
Sdustin 578 Posted April 23, 2014 Report Share Posted April 23, 2014 Dproctor Was the would rpk handguards an easy fit? Quote Link to post Share on other sites
dproctor15 11 Posted April 23, 2014 Report Share Posted April 23, 2014 It was simple it took all of 1.5 hours to do, and that was with me taking measurements and documentation photos to do a tutorial for everyone who wants to go this route. I have not posted any of that up because I wanted to do a durability test to make sure it would not splinter or crack from the pressure..... After 25 slugs, ~75 high brass buck shot, and a couple of hundred rounds of bird shot, I have not seen any splintering or cracking at all. I still need to smooth over a run in the polyurethane but after that I will do a more in dept post for the wood handguards. Quote Link to post Share on other sites
Sdustin 578 Posted April 23, 2014 Report Share Posted April 23, 2014 Cool look forward to that thread. I really need some wood, just to match my s308 Quote Link to post Share on other sites
angryoxblood 0 Posted April 30, 2014 Report Share Posted April 30, 2014 My all plum Vepr 12. Quote Link to post Share on other sites
Vgnope 8 Posted May 7, 2014 Report Share Posted May 7, 2014 Just broke it in with Fed 00 and slugs. No failures at all. Opened the box gave it some oil and racked it a few times. 1 Quote Link to post Share on other sites
Sdustin 578 Posted May 7, 2014 Report Share Posted May 7, 2014 Just broke it in with Fed 00 and slugs. No failures at all. Opened the box gave it some oil and racked it a few times. I started dry stright from the box and fired 200 rounds of federal birdshot with no issues at all. Quote Link to post Share on other sites
Vgnope 8 Posted May 7, 2014 Report Share Posted May 7, 2014 I couldn't resist with a lil extra lube. But I am considering on switching the rear sight with the one that's on my x39. Quote Link to post Share on other sites
braveheartz 1 Posted May 15, 2014 Report Share Posted May 15, 2014 Bought it a week ago, just got done modding it. The ATI scorpion pistol grip is amazingly comfortable and fits perfectly, highly recommended. Btw, with the chaos quad rail, the stock is not able to lock into the stock release button due to the bulging out of the side rail. Others on here have reported that they were able to fold and lock in the stock, i'm not sure what's the problem is with mine. 1 Quote Link to post Share on other sites
Kokopelli 7 Posted May 16, 2014 Report Share Posted May 16, 2014 1 Quote Link to post Share on other sites
Sdustin 578 Posted June 5, 2014 Report Share Posted June 5, 2014 Got my new 12 round mag and choke tube adapter. I freaking love this gun so much. 1 Quote Link to post Share on other sites
mikeNM 8 Posted June 7, 2014 Report Share Posted June 7, 2014 Just getting started?... One of my Vepr's. Built for 3 gun competition. 1 Quote Link to post Share on other sites
voonman 133 Posted June 7, 2014 Report Share Posted June 7, 2014 I lucked into one of the few remaining new 19" Vepr 12 fixed stock models on Gunbroker last week...just got it a few days ago and already dressed her up a little bit. Loving it so far With a few relatives... What stock tube are you using on your vepr12? Quote Link to post Share on other sites
mmad 9 Posted September 4, 2014 Report Share Posted September 4, 2014 Recently got my bolt and carrier back after a long wait...celebrating with an update pic. 1 Quote Link to post Share on other sites
Sdustin 578 Posted September 4, 2014 Report Share Posted September 4, 2014 1 Quote Link to post Share on other sites
DresNightfire 39 Posted December 17, 2014 Report Share Posted December 17, 2014 I apologize for the delay of 6 months in posting this, but here's my buddy's VEPR 12 SBS (chop and thread done by Radical Firearms): 1 Quote Link to post Share on other sites
Kingchedr 12 Posted December 18, 2014 Report Share Posted December 18, 2014 I know it say vepr but I went ahead n put pics if my saiga 12 with a magwell as well 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.