usmc_308 0 Posted January 28, 2010 Report Share Posted January 28, 2010 Nothin' fancy about this conversion but it's set up just the way that I like It. Quote Link to post Share on other sites
spraypaint 1 Posted January 29, 2010 Report Share Posted January 29, 2010 my saiga 12 spraypaint. Quote Link to post Share on other sites
Sumsky 115 Posted January 30, 2010 Report Share Posted January 30, 2010 [This is my first post. I have been doing a lot of reading and looking and all the great Saiga builds. Hopefully I can get my Saiga looking as good as the ones on this Forum.attachment=40061:IM011621.JPG] Quote Link to post Share on other sites
qweasd2 0 Posted February 7, 2010 Report Share Posted February 7, 2010 Got my Chaos extended upper in today: Quote Link to post Share on other sites
allan 0 Posted February 7, 2010 Report Share Posted February 7, 2010 Got Zombies? Quote Link to post Share on other sites
Nailbomb 10,221 Posted February 7, 2010 Report Share Posted February 7, 2010 The Digital Monster is done... Full build thread here... http://forum.saiga-12.com/index.php?showtopic=47299 Quote Link to post Share on other sites
BrutalGardener 205 Posted February 8, 2010 Report Share Posted February 8, 2010 Here's my S12. Nothing fancy - I don't weld, do rivets, etc... not even that handy with a drill and dremel, though I'm starting to get used to it, after doing two Saiga restorations now. I'd just glad that my buddy is always happy to let me use his shop for this stuff, in exchange for cases of beer. Parts: - Tromix modified Tapco G2 FCG - Krebs modified Tapco retaining plate. - Tromix DIY S12 bolt-on trigger guard - Tapco "SAW" pistol grip - Ace skeleton stock with folding assembly on a CSS (old trigger holes bolt-on) internal receiver block - Tromix bolt-on Galil charging handle - MD Arms enhanced, 4 settings gas regulator - Chaos tri rail - CAA flashlight mount - SureFire G2 LED light - Brownell's military style forward grip - Sloppy, but sturdy Duracoat receiver paint-job - Mags: MD Arms drum and AGP Gen 2 6 rounder Quote Link to post Share on other sites
cholly_horse 3 Posted February 11, 2010 Report Share Posted February 11, 2010 Heres mine. Tapco Furniture. Tromix DIY Trigger Guard, and FCG. MD-20 Drum Surefire 10 & 12 rounders Factory Mag Voodoo Tactical Softcase. Quote Link to post Share on other sites
cb8180 2 Posted February 12, 2010 Report Share Posted February 12, 2010 Here's mine. Basic conversion. Thanks to everyone for making it possible! P.S. Please excuse the mess on the table! Quote Link to post Share on other sites
dezko 1 Posted February 13, 2010 Report Share Posted February 13, 2010 (edited) And here is my SAIGA 12 Legion: My link this is mess on the table: and under table too. Edited February 13, 2010 by 2xD 1 Quote Link to post Share on other sites
Stink Star 13 Posted February 14, 2010 Report Share Posted February 14, 2010 this is mine about an hour after i picked it up from the FFL... already ordered the conversion parts, cant wait to start Quote Link to post Share on other sites
mgconnor13 206 Posted February 15, 2010 Report Share Posted February 15, 2010 here's my S-12 that I've been working on for some time. Threw in my Romanian AK and 1911 since they where near by Quote Link to post Share on other sites
MCASgt New River 10,036 Posted February 16, 2010 Report Share Posted February 16, 2010 If you have posted a comment or question in this PICTURE thread and not in the "Sister" comments & questions thread it HAS and WILL be deleted. This is for PICTURES, IMAGES, PHOTOGRAPHS ECT with a brief descripition of your weapon(s). Respectfully, MCASSgt New River Quote Link to post Share on other sites
Top Notch 0 Posted February 21, 2010 Report Share Posted February 21, 2010 (edited) This is my 100% stock S12 prior to me starting the conversion process. I am waiting for the duracoat to cure and I will post pics when I get it put together next week Edited February 21, 2010 by Top Notch Quote Link to post Share on other sites
evlblkwpnz 3,418 Posted February 21, 2010 Report Share Posted February 21, 2010 I have owned plenty of ARs and AKs, but this is my first Saiga 12. Always wanted one, but never sprung. It is a DIY conversion from an unfired IZ-109 with a welded trigger guard, Tapco trigger and disconnector, ATI grip, and a Romy pushbutton folder. Otherwise it is stock. The only mag I have for it is an AGP 10 rounder, so I am good on the 922r count. I haven't shot it yet and I am sure a buttpad will be worth it's weight in gold, lol. Quote Link to post Share on other sites
got_drift 1 Posted February 22, 2010 Report Share Posted February 22, 2010 (edited) mysaiga12 ace side folding stock alliancearmement pistol grip, tri rail, and triton door breech tapco trigger pack upgraded gas piston and ported gas tubes chaos quick clean 2 MD arms drums and a partridge in a pear tree Edited February 22, 2010 by got_drift Quote Link to post Share on other sites
Stink Star 13 Posted February 22, 2010 Report Share Posted February 22, 2010 im really glad i did that charging handle knob.... feels much better. most likely switching the buttstock to a tapco 6 position as well. this one will probally make it onto my x39 whenever i get around to converting it Quote Link to post Share on other sites
bikeryoda 7 Posted February 22, 2010 Report Share Posted February 22, 2010 Ok, I have to sing praises about Jaymce and the great products he offers. I had this custom fuglystick made for my S-12 and absolutely LOVE it! Quote Link to post Share on other sites
bobakman 7 Posted February 23, 2010 Report Share Posted February 23, 2010 My Mod is complete for now.Thanks to all the Forum members for your help. Bob 1 Quote Link to post Share on other sites
bikeryoda 7 Posted February 23, 2010 Report Share Posted February 23, 2010 It's upside down!! I actually took some inspiration from yours, and Jaymce worked with me on the design for it... did an excellent job. Quote Link to post Share on other sites
AZ Gun Nut 8 Posted February 27, 2010 Report Share Posted February 27, 2010 I finally got around to posting the pics. Snow Grey DuraCoat w/ Matte Clear DPH stock with folding hardware Chaos rail, forward grip, compensator and gas plug Tromix FCG and DIY trigger guard Mako pistol grip Counter Sniper Mini Red Dot (not pictured) My thanks to all the members for their invaluable help! Quote Link to post Share on other sites
KrisFox 69 Posted February 27, 2010 Report Share Posted February 27, 2010 Quote Link to post Share on other sites
going12220 125 Posted February 28, 2010 Report Share Posted February 28, 2010 (edited) while now I'm getting into the 20 stuff this is my 12 with my Frankenmag, mag well mod to work with agp and promags, and my home made puck. the 20 will be done with a conversion and a little more tricked out, but I still like my 12 for 3 gun better at this point. Really got to figure out how to do the mag well for the 20. Edited February 28, 2010 by going12220 Quote Link to post Share on other sites
going12220 125 Posted February 28, 2010 Report Share Posted February 28, 2010 mag well Quote Link to post Share on other sites
going12220 125 Posted February 28, 2010 Report Share Posted February 28, 2010 well puck it well puck it well puck it Quote Link to post Share on other sites
Salmonking 149 Posted March 2, 2010 Report Share Posted March 2, 2010 Well, it took me long enough, but I've finally got it all finished. All that's left to do is shoot the crap out of some gallons of water... possibly find a skeet range in South Florida. Quote Link to post Share on other sites
akastormi 617 Posted March 3, 2010 Report Share Posted March 3, 2010 OK there's what mine looks like now. Little retro, little new age. Quote Link to post Share on other sites
MCASgt New River 10,036 Posted March 3, 2010 Report Share Posted March 3, 2010 THIS THREAD IS FOR POSTING PICTURES ONLY! NO COMMENTS, NO QUESTIONS, NO THUMBS UP OR DOWN...ALL OTHER POSTS WILL BE DELETED AND REPEAT OFFENDERS WILL BE DEALT WITH ACCORDINGLY. Quote Link to post Share on other sites
mark78410 0 Posted March 4, 2010 Report Share Posted March 4, 2010 my toy Quote Link to post Share on other sites
TheKid 3 Posted March 5, 2010 Report Share Posted March 5, 2010 Got it last week.... Just finished the basic work...more to go.....Need more mags... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.