jcmacconnell 25 Posted August 9, 2010 Report Share Posted August 9, 2010 JAMMER....I'M IN. I HAVE A 08 3 PORT 19" BARREL. I'LL THROW 500 ROUNDS THROUGH IT EASY! Just let me know the details Quote Link to post Share on other sites
Gothmog 24 Posted August 9, 2010 Report Share Posted August 9, 2010 If you wish to consider me, I would be honoured. I have a 1999, restored, 18" barrel with a Tromix flash suppressor. It has 1 large port at 7/64, I am currently using a gunfixer plug, but if I open it all the way up it gets over gassed big time. So, I think this would be a good one to test out on, if it can handle and regulate this one, it gotta be good. I have 2k worth of shells in my locker, from bird to slug that I can contribute, and since I do all my own reloading, getting ammo aint no biggie. Good luck on your project, hope it turns out to be another great product for the S12. HUZZAH!! Quote Link to post Share on other sites
Heath_h49008 442 Posted August 9, 2010 Report Share Posted August 9, 2010 My numbers wouldn't be very reliable. My 4 hole gun has a mid barrel brake and my 3 hole gun has been shortened to 18.4". It might be better actually. They are building a relief valve for the gas system. You set it to the gas pressure that reliably cycles the weapon, but to vent the rest. So it bypasses nothing/very little with weak birdshot, but bypasses a lot with high pressure slugs and Buck... the gun sees the same force so you aren't beating your receiver. Get it? But seeing as how the s12 is so personalized, some guns will require less gas, some more to achieve the effect.... hence, swap relief springs and test which one works, and 500 rnds for durability/ fouling. Sounds fun! Quote Link to post Share on other sites
caal 9 Posted August 9, 2010 Report Share Posted August 9, 2010 Got any pics ? Quote Link to post Share on other sites
MT Predator 2,294 Posted August 9, 2010 Report Share Posted August 9, 2010 09 three port 19" with internal polishing and a shark brake here if you need another tester. Quote Link to post Share on other sites
Paulyski 2,227 Posted August 9, 2010 Report Share Posted August 9, 2010 (edited) My numbers wouldn't be very reliable. My 4 hole gun has a mid barrel brake and my 3 hole gun has been shortened to 18.4". One would think he would be interested in the unique configurations. I'm sure he would appreciate a wide range of data to crunch to ensure he has the largest customer base possible. Are you throwing shells the right distances? Go-Guns; If you don't have a 19" that came with undersized ports & now are opened up to 3 @ .0975 (3/32) I'll give it a run for you & document my results, ejection distances, ammo types, mag types & include videos so you can assess ejection & can tune & get the most reliable product on the market before you go to market. Of course I would review to you privately as not to start any rumors before release. My S-12 runs flawlessly & I test with 2 Russian 8s, 2 MD-20s & 2 tuned AGPs. Offer's there. ETA; I run a factory plug & have a mildly profiled & highly polished bolt & carrier. Edited August 9, 2010 by Paulyski Quote Link to post Share on other sites
billyjoebob 10 Posted August 9, 2010 Report Share Posted August 9, 2010 (edited) I'm in. I have two, 19" 3 port guns. One runs very well, the other has occasional FTF and FTE's but I think that's because it hasn't fully broken in yet. I'd give it a run on both... ***edited for typos*** Edited August 14, 2010 by billyjoebob Quote Link to post Share on other sites
doodi1 23 Posted August 9, 2010 Report Share Posted August 9, 2010 I'm in also. I have a 19" 4 port and have a TAC 47 Automatic plug coming in also. Love to compare it back to back and giveyou feedback. Quote Link to post Share on other sites
E-TAC 47 Posted August 9, 2010 Author Report Share Posted August 9, 2010 My numbers wouldn't be very reliable. My 4 hole gun has a mid barrel brake and my 3 hole gun has been shortened to 18.4". One would think he would be interested in the unique configurations. I'm sure he would appreciate a wide range of data to crunch to ensure he has the largest customer base possible. Are you throwing shells the right distances? Go-Guns; If you don't have a 19" that came with undersized ports & now are opened up to 3 @ .0975 (3/32) I'll give it a run for you & document my results, ejection distances, ammo types, mag types & include videos so you can assess ejection & can tune & get the most reliable product on the market before you go to market. Of course I would review to you privately as not to start any rumors before release. My S-12 runs flawlessly & I test with 2 Russian 8s, 2 MD-20s & 2 tuned AGPs. Offer's there. ETA; I run a factory plug & have a mildly profiled & highly polished bolt & carrier. Yes, testers would have to fill out our NDA first. Aloha. Quote Link to post Share on other sites
Deussne 38 Posted August 9, 2010 Report Share Posted August 9, 2010 Hey there, I got a 22" shotgun. (3) port I would like to join the test. Quote Link to post Share on other sites
MadDog 3 Posted August 9, 2010 Report Share Posted August 9, 2010 I have two 19" and 1 8". Let me know...MadDog in GA Quote Link to post Share on other sites
shades_of_grey 1,092 Posted August 9, 2010 Report Share Posted August 9, 2010 I'd volunteer to test one of these... except that my S-12's gas system already self-regulates and my 19" '08 gun has 6 ports. Good luck with this new product. If it works well, I'm sure you'll have a tough time keeping up with demand. Quote Link to post Share on other sites
epbullen 21 Posted August 9, 2010 Report Share Posted August 9, 2010 I'll do it if you supply the rounds Seriously though, this sounds real neat! I'm game if y'all still need some testers Quote Link to post Share on other sites
saigaguy09 3 Posted August 9, 2010 Report Share Posted August 9, 2010 2008 3 port 24'' converted I'll use my s12 as a guinea pig any day! Quote Link to post Share on other sites
YOT 3,743 Posted August 10, 2010 Report Share Posted August 10, 2010 I'd like to test one. '09 unconverted original set-up (except polishing) 19" three holer. It runs flawlessly except having to set it on 2 for light loads. Quote Link to post Share on other sites
scoutjoe 276 Posted August 10, 2010 Report Share Posted August 10, 2010 22" fixed full choke, all factory (and in camo ) Other ones are 19" with 3 factory ports and one extra Vankiller hole, 22" 3 factory ports with an extra scoutjoe port. Could probably get some other local guys who have some, I'm thinking more 19" 4 port guns. Quote Link to post Share on other sites
raidersfan_5544 57 Posted August 10, 2010 Report Share Posted August 10, 2010 What about a Tromix 12in SBS? Quote Link to post Share on other sites
rock 1 Posted August 10, 2010 Report Share Posted August 10, 2010 sound great Im IN glad to do it,3 port 19in Quote Link to post Share on other sites
Slug-O 6 Posted August 10, 2010 Report Share Posted August 10, 2010 I have an 8" Tromix S17 with 4 holes and Suppressor I can test for you. Slug-O Quote Link to post Share on other sites
6500rpm 670 Posted August 10, 2010 Report Share Posted August 10, 2010 For me to commit to 500 rounds right now I think I'd need a ticket to Waikiki and dinner at Metteo's:rolleyes: . That said, once you have them tested and up for sale I could easily see one in my future. Thanks for a chance at a fine product. Quote Link to post Share on other sites
madmax4x4 68 Posted August 10, 2010 Report Share Posted August 10, 2010 I'll test it on a Tromix 10 inch if you want. You can ship it with the sbs rail I ordered if you want Quote Link to post Share on other sites
corbin 621 Posted August 11, 2010 Report Share Posted August 11, 2010 Not sure if you need another 4 port 19" 2008 model or not, but that's what I can offer, as well as video. Corbin Quote Link to post Share on other sites
ErikTaylor 41 Posted August 11, 2010 Report Share Posted August 11, 2010 I'm not sure if you need another 4 port 19" gun that is completely modified but if you do I'd be more than happy to participate. I'd video the whole way through and will do whatever you need me to do to ensure a thorough review. Thank you. Erik Quote Link to post Share on other sites
ErikTaylor 41 Posted August 11, 2010 Report Share Posted August 11, 2010 Also here is a link to my S12: http://forum.saiga-12.com/index.php?showtopic=55377&pid=536497&st=30entry536497 Quote Link to post Share on other sites
E-TAC 47 Posted August 13, 2010 Author Report Share Posted August 13, 2010 testers I've got 5 small production runs b4 we run a batch of the free test S12 Auto Valves. We will be giving a bunch away! Quote Link to post Share on other sites
Gibbles 23 Posted August 13, 2010 Report Share Posted August 13, 2010 I have a converted 3 port 08 19in that runs 3gun every month or so that's in. Quote Link to post Share on other sites
sapper1371usmc 107 Posted August 13, 2010 Report Share Posted August 13, 2010 testers I've got 5 small production runs b4 we run a batch of the free test S12 Auto Valves. We will be giving a bunch away! Jammer, Have you already notified the persons who will be testing your plug? Thanks Quote Link to post Share on other sites
E-TAC 47 Posted August 13, 2010 Author Report Share Posted August 13, 2010 testers I've got 5 small production runs b4 we run a batch of the free test S12 Auto Valves. We will be giving a bunch away! Jammer, Have you already notified the persons who will be testing your plug? Thanks not yet, testers will get an email 1 week b4 we ship them out. Aloha Quote Link to post Share on other sites
uzitiger 193 Posted August 14, 2010 Report Share Posted August 14, 2010 I'm willing to try one. Where does it go and what do I need to take down to install it? Quote Link to post Share on other sites
zenman223 460 Posted August 15, 2010 Report Share Posted August 15, 2010 if theres any left id like to review one, just bought a brand new 19" 3 port today and plan on putting alot of rounds thru it soon. would be honored to evaluate for you! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.